Adding cython v0.20.2 in third-party.

third_party/cython/src/Cython/Includes/cpython/module.pxd

Index: third_party/cython/src/Cython/Includes/cpython/module.pxd
diff --git a/third_party/cython/src/Cython/Includes/cpython/module.pxd b/third_party/cython/src/Cython/Includes/cpython/module.pxd
new file mode 100644
index 0000000000000000000000000000000000000000..84e23ca711c0f04b4ee9bd3124722bd22c1cfa18
--- /dev/null
+++ b/third_party/cython/src/Cython/Includes/cpython/module.pxd
@@ -0,0 +1,175 @@
+from cpython.ref cimport PyObject
+
+cdef extern from "Python.h":
+    ctypedef struct _inittab
+
+    #####################################################################
+    # 5.3 Importing Modules
+    #####################################################################
+    object PyImport_ImportModule(char *name)
+    # Return value: New reference.
+    # This is a simplified interface to PyImport_ImportModuleEx()
+    # below, leaving the globals and locals arguments set to
+    # NULL. When the name argument contains a dot (when it specifies a
+    # submodule of a package), the fromlist argument is set to the
+    # list ['*'] so that the return value is the named module rather
+    # than the top-level package containing it as would otherwise be
+    # the case. (Unfortunately, this has an additional side effect
+    # when name in fact specifies a subpackage instead of a submodule:
+    # the submodules specified in the package's __all__ variable are
+    # loaded.) Return a new reference to the imported module, or NULL
+    # with an exception set on failure.
+
+    object PyImport_ImportModuleEx(char *name, object globals, object locals, object fromlist)
+    # Return value: New reference.
+
+    # Import a module. This is best described by referring to the
+    # built-in Python function __import__(), as the standard
+    # __import__() function calls this function directly.
+
+    # The return value is a new reference to the imported module or
+    # top-level package, or NULL with an exception set on failure
+    # (before Python 2.4, the module may still be created in this
+    # case). Like for __import__(), the return value when a submodule
+    # of a package was requested is normally the top-level package,
+    # unless a non-empty fromlist was given. Changed in version 2.4:
+    # failing imports remove incomplete module objects.
+
+    object PyImport_Import(object name)
+    # Return value: New reference.
+    # This is a higher-level interface that calls the current ``import
+    # hook function''. It invokes the __import__() function from the
+    # __builtins__ of the current globals. This means that the import
+    # is done using whatever import hooks are installed in the current
+    # environment, e.g. by rexec or ihooks.
+
+    object PyImport_ReloadModule(object m)
+    # Return value: New reference.
+    # Reload a module. This is best described by referring to the
+    # built-in Python function reload(), as the standard reload()
+    # function calls this function directly. Return a new reference to
+    # the reloaded module, or NULL with an exception set on failure
+    # (the module still exists in this case).
+
+    PyObject* PyImport_AddModule(char *name) except NULL
+    # Return value: Borrowed reference.
+    # Return the module object corresponding to a module name. The
+    # name argument may be of the form package.module. First check the
+    # modules dictionary if there's one there, and if not, create a
+    # new one and insert it in the modules dictionary. Return NULL
+    # with an exception set on failure. Note: This function does not
+    # load or import the module; if the module wasn't already loaded,
+    # you will get an empty module object. Use PyImport_ImportModule()
+    # or one of its variants to import a module. Package structures
+    # implied by a dotted name for name are not created if not already
+    # present.
+
+    object PyImport_ExecCodeModule(char *name, object co)
+    # Return value: New reference.
+    # Given a module name (possibly of the form package.module) and a
+    # code object read from a Python bytecode file or obtained from
+    # the built-in function compile(), load the module. Return a new
+    # reference to the module object, or NULL with an exception set if
+    # an error occurred. Name is removed from sys.modules in error
+    # cases, and even if name was already in sys.modules on entry to
+    # PyImport_ExecCodeModule(). Leaving incompletely initialized
+    # modules in sys.modules is dangerous, as imports of such modules
+    # have no way to know that the module object is an unknown (and
+    # probably damaged with respect to the module author's intents)
+    # state.
+    # This function will reload the module if it was already
+    # imported. See PyImport_ReloadModule() for the intended way to
+    # reload a module.
+    # If name points to a dotted name of the form package.module, any
+    # package structures not already created will still not be
+    # created.
+
+
+    long PyImport_GetMagicNumber()
+    # Return the magic number for Python bytecode files (a.k.a. .pyc
+    # and .pyo files). The magic number should be present in the first
+    # four bytes of the bytecode file, in little-endian byte order.
+
+    PyObject* PyImport_GetModuleDict() except NULL
+    # Return value: Borrowed reference.
+    # Return the dictionary used for the module administration
+    # (a.k.a. sys.modules). Note that this is a per-interpreter
+    # variable.
+
+
+    int PyImport_ImportFrozenModule(char *name) except -1
+    # Load a frozen module named name. Return 1 for success, 0 if the
+    # module is not found, and -1 with an exception set if the
+    # initialization failed. To access the imported module on a
+    # successful load, use PyImport_ImportModule(). (Note the misnomer
+    # -- this function would reload the module if it was already
+    # imported.)
+
+
+    int PyImport_ExtendInittab(_inittab *newtab) except -1
+    # Add a collection of modules to the table of built-in
+    # modules. The newtab array must end with a sentinel entry which
+    # contains NULL for the name field; failure to provide the
+    # sentinel value can result in a memory fault. Returns 0 on
+    # success or -1 if insufficient memory could be allocated to
+    # extend the internal table. In the event of failure, no modules
+    # are added to the internal table. This should be called before
+    # Py_Initialize().
+
+    #####################################################################
+    # 7.5.5 Module Objects
+    #####################################################################
+
+    # PyTypeObject PyModule_Type
+    #
+    # This instance of PyTypeObject represents the Python module
+    # type. This is exposed to Python programs as types.ModuleType.
+
+    bint PyModule_Check(object p)
+    # Return true if p is a module object, or a subtype of a module
+    # object.
+
+    bint PyModule_CheckExact(object p)
+    # Return true if p is a module object, but not a subtype of PyModule_Type.
+
+    object PyModule_New(char *name)
+    # Return value: New reference.
+    # Return a new module object with the __name__ attribute set to
+    # name. Only the module's __doc__ and __name__ attributes are
+    # filled in; the caller is responsible for providing a __file__
+    # attribute.
+
+    PyObject* PyModule_GetDict(object module) except NULL
+    # Return value: Borrowed reference.
+    # Return the dictionary object that implements module's namespace;
+    # this object is the same as the __dict__ attribute of the module
+    # object. This function never fails. It is recommended extensions
+    # use other PyModule_*() and PyObject_*() functions rather than
+    # directly manipulate a module's __dict__.
+
+    char* PyModule_GetName(object module) except NULL
+    # Return module's __name__ value. If the module does not provide
+    # one, or if it is not a string, SystemError is raised and NULL is
+    # returned.
+
+    char* PyModule_GetFilename(object module) except NULL
+    # Return the name of the file from which module was loaded using
+    # module's __file__ attribute. If this is not defined, or if it is
+    # not a string, raise SystemError and return NULL.
+
+    int PyModule_AddObject(object module,  char *name, object value) except -1
+    # Add an object to module as name. This is a convenience function
+    # which can be used from the module's initialization
+    # function. This steals a reference to value. Return -1 on error,
+    # 0 on success.
+
+    int PyModule_AddIntant(object module,  char *name, long value) except -1
+    # Add an integer ant to module as name. This convenience
+    # function can be used from the module's initialization
+    # function. Return -1 on error, 0 on success.
+
+    int PyModule_AddStringant(object module,  char *name,  char *value) except -1
+    # Add a string constant to module as name. This convenience
+    # function can be used from the module's initialization
+    # function. The string value must be null-terminated. Return -1 on
+    # error, 0 on success.