Added gsutil to depot tools

third_party/gsutil/gslib/addlhelp/versioning.py

+# Copyright 2012 Google Inc. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from gslib.help_provider import HELP_NAME
+from gslib.help_provider import HELP_NAME_ALIASES
+from gslib.help_provider import HELP_ONE_LINE_SUMMARY
+from gslib.help_provider import HelpProvider
+from gslib.help_provider import HELP_TEXT
+from gslib.help_provider import HelpType
+from gslib.help_provider import HELP_TYPE
+
+_detailed_help_text = ("""
+<B>OVERVIEW</B>
+  Versioning-enabled buckets maintain an archive of objects, providing a way to
+  un-delete data that you accidentally deleted, or to retrieve older versions of
+  your data. You can turn versioning on or off for a bucket at any time. Turning
+  versioning off leaves existing object versions in place, and simply causes the
+  bucket to stop accumulating new object versions. In this case, if you upload
+  to an existing object the current version is overwritten instead of creating
+  a new version.
+
+  Regardless of whether you have enabled versioning on a bucket, every object
+  has two associated positive integer fields:
+    - the generation, which is updated when the content of an object is
+      overwritten.
+    - the meta-generation, which identifies the metadata generation. It starts
+      at 1; is updated every time the metadata (e.g., ACL or Content-Type) for a
+      given content generation is updated; and gets reset when the generation
+      number changes.
+
+  Of these two integers, only the generation is used when working with versioned
+  data. Both generation and meta-generation can be used with concurrency control
+  (discussed in a later section).
+
+  To work with object versioning in gsutil, you can use a flavor of storage URIs
+  that that embed the object generation, which we refer to as version-specific URIs.
+  For example, the version-less object URI:
+
+    gs://bucket/object
+
+  might have have two versions, with these version-specific URIs:
+
+    gs://bucket/object#1360383693690000
+    gs://bucket/object#1360383802725000
+  
+  The following sections discuss how to work with versioning and concurrency
+  control.
+
+
+<B>OBJECT VERSIONING</B>
+  You can view, enable, and disable object versioning on a bucket using
+  the getversioning and setversioning commands. For example:
+
+    gsutil setversioning on gs://bucket
+
+  will enable versioning for the named bucket. See 'gsutil help getversioning'
+  and 'gsutil help setversioning' for additional details.
+
+  To see all object versions in a versioning-enabled bucket along with
+  their generation.meta-generation information, use gsutil ls -a:
+
+    gsutil ls -a gs://bucket
+
+  You can also specify particular objects for which you want to find the
+  version-specific URI(s), or you can use wildcards:
+
+    gsutil ls -a gs://bucket/object1 gs://bucket/images/*.jpg
+
+  The generation values form a monotonically increasing sequence as you create
+  additional object versions.  Because of this, the latest object version is
+  always the last one listed in the gsutil ls output for a particular object.
+  For example, if a bucket contains these three versions of gs://bucket/object:
+
+    gs://bucket/object#1360035307075000
+    gs://bucket/object#1360101007329000
+    gs://bucket/object#1360102216114000
+
+  then gs://bucket/object#1360102216114000 is the latest version and
+  gs://bucket/object#1360035307075000 is the oldest available version.
+
+  If you specify version-less URIs with gsutil, you will operate on the
+  latest not-deleted version of an object, for example:
+
+    gsutil cp gs://bucket/object ./dir
+
+  or
+
+    gsutil rm gs://bucket/object
+
+  To operate on a specific object version, use a version-specific URI.
+  For example, suppose the output of the above gsutil ls -a command is:
+
+    gs://bucket/object#1360035307075000
+    gs://bucket/object#1360101007329000
+
+  In this case, the command:
+
+    gsutil cp gs://bucket/object#1360035307075000 ./dir
+
+  will retrieve the second most recent version of the object.
+
+  Note that version-specific URIs cannot be the target of the gsutil cp
+  command (trying to do so will result in an error), because writing to a
+  versioned object always creates a new version.
+
+  If an object has been deleted, it will not show up in a normal gsutil ls
+  listing (i.e., ls without the -a option). You can restore a deleted object by
+  running gsutil ls -a to find the available versions, and then copying one of
+  the version-specific URIs to the version-less URI, for example:
+
+    gsutil cp gs://bucket/object#1360101007329000 gs://bucket/object
+
+  Note that when you do this it creates a new object version, which will incur
+  additional charges. You can get rid of the extra copy by deleting the older
+  version-specfic object:
+
+    gsutil rm gs://bucket/object#1360101007329000
+
+  Or you can combine the two steps by using the gsutil mv command:
+
+    gsutil mv gs://bucket/object#1360101007329000 gs://bucket/object
+
+  If you want to remove all versions of an object use the gsutil rm -a option:
+
+    gsutil rm -a gs://bucket/object
+
+  Note that there is no limit to the number of older versions of an object you
+  will create if you continue to upload to the same object in a versioning-
+  enabled bucket. It is your responsibility to delete versions beyond the ones
+  you want to retain.
+
+
+<B>CONCURRENCY CONTROL</B>
+  If you are building an application using Google Cloud Storage, you may need to
+  be careful about concurrency control. Normally gsutil itself isn't used for
+  this purpose, but it's possible to write scripts around gsutil that perform
+  concurrency control.
+
+  For example, suppose you want to implement a "rolling update" system using
+  gsutil, where a periodic job computes some data and uploads it to the cloud.
+  On each run, the job starts with the data that it computed from last run, and
+  computes a new value. To make this system robust, you need to have multiple
+  machines on which the job can run, which raises the possibility that two
+  simultaneous runs could attempt to update an object at the same time. This
+  leads to the following potential race condition:
+    - job 1 computes the new value to be written
+    - job 2 computes the new value to be written
+    - job 2 writes the new value
+    - job 1 writes the new value
+
+  In this case, the value that job 1 read is no longer current by the time
+  it goes to write the updated object, and writing at this point would result
+  in stale (or, depending on the application, corrupt) data.
+
+  To prevent this, you can find the version-specific name of the object that was
+  created, and then use the information contained in that URI to specify an
+  x-goog-if-generation-match header on a subsequent gsutil cp command. You can
+  do this in two steps. First, use the gsutil cp -v option at upload time to get
+  the version-specific name of the object that was created, for example:
+
+    gsutil cp -v file gs://bucket/object
+
+  might output:
+
+    Created: gs://bucket/object#1360432179236000
+
+  You can extract the generation value from this object and then construct a
+  subsequent gsutil command like this:
+
+    gsutil -h x-goog-if-generation-match:1360432179236000 cp newfile \\
+        gs://bucket/object
+
+  This command requests Google Cloud Storage to attempt to upload newfile
+  but to fail the request if the generation of newfile that is live at the
+  time of the upload does not match that specified.
+
+  If the command you use updates object metadata, you will need to find the
+  current meta_generation for an object. To do this, use the gsutil ls -a and
+  -l options. For example, the command:
+
+    gsutil ls -l -a gs://bucket/object
+
+  will output something like:
+
+      64  2013-02-12T19:59:13  gs://bucket/object#1360699153986000  meta_generation=3
+    1521  2013-02-13T02:04:08  gs://bucket/object#1360721048778000  meta_generation=2
+
+  Given this information, you could use the following command to request setting
+  the ACL on the older version of the object, such that the command will fail
+  unless that is the current version of the data+metadata:
+
+    gsutil -h x-goog-if-generation-match:1360699153986000 -h \\
+      x-goog-if-metageneration-match:3 setacl public-read \\
+      gs://bucket/object#1360699153986000
+
+  Without adding these headers, the update would simply overwrite the existing
+  ACL. Note that in contrast, the gsutil chacl command uses these headers
+  automatically, because it performs a read-modify-write cycle in order to edit
+  ACLs.
+
+  If you want to experiment with how generations and metagenerations work, try
+  the following. First, upload an object; then use gsutil ls -l -a to list all
+  versions of the object, along with each version's meta_generation; then re-
+  upload the object and repeat the gsutil ls -l -a. You should see two object
+  versions, each with meta_generation=1. Now try setting the ACL, and rerun the
+  gsutil ls -l -a. You should see the most recent object generation now has
+  meta_generation=2.
+
+
+<B>FOR MORE INFORMATION</B>
+  For more details on how to use versioning and preconditions, see
+  https://developers.google.com/storage/docs/object-versioning
+""")
+
+
+class CommandOptions(HelpProvider):
+  """Additional help about object versioning."""
+
+  help_spec = {
+    # Name of command or auxiliary help info for which this help applies.
+    HELP_NAME : 'versioning',
+    # List of help name aliases.
+    HELP_NAME_ALIASES : ['concurrency', 'concurrency control', 'versioning',
+                         'versions'],
+    # Type of help:
+    HELP_TYPE : HelpType.ADDITIONAL_HELP,
+    # One line summary of this help.
+    HELP_ONE_LINE_SUMMARY : 'Working with object versions; concurrency control',
+    # The full help text.
+    HELP_TEXT : _detailed_help_text,
+  }