Added support for greylisting of system calls.

sandbox/linux/seccomp-bpf/syscall.cc

+// Copyright (c) 2012 The Chromium Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+
+#include <errno.h>
+#include <stdarg.h>
+#include <asm/unistd.h>
+
+#include "sandbox/linux/seccomp-bpf/syscall.h"
+
+
+namespace playground2 {
+
+  asm(      // We need to be able to tell the kernel exactly where we made a
+            // system call. The C++ compiler likes to sometimes clone or
+            // inline code, which would inadvertently end up duplicating
+            // the entry point.
+            // "gcc" can suppress code duplication with suitable function
+            // attributes, but "clang" doesn't have this ability.
+            // The "clang" developer mailing list suggested that the correct
+            // and portable solution is a file-scope assembly block.
+            // N.B. We do mark our code as a proper function so that backtraces
+            // work correctly. But we make absolutely no attempt to use the
+            // ABI's calling conventions for passing arguments. We will only
+            // ever be called from assembly code and thus can pick more
+            // suitable calling conventions.
+#if defined(__i386__)
+            ".text\n"
+            ".align 16, 0x90\n"
+            ".type SyscallAsm, @function\n"
+ "SyscallAsm:.cfi_startproc\n"
+            // Check if "%eax" is negative. If so, do not attempt to make a
+            // system call. Instead, compute the return address that is visible
+            // to the kernel after we execute "int $0x80". This address can be
+            // used as a marker that BPF code inspects.
+            "test %eax, %eax\n"
+            "jge  1f\n"
+            // Always, make sure that our code is position-independent, or
+            // address space randomization might not work on i386. This means,
+            // we can't use "lea", but instead have to rely on "call/pop".
+            "call 0f;   .cfi_adjust_cfa_offset  4\n"
+          "0:pop  %eax; .cfi_adjust_cfa_offset -4\n"
+            "addl $2f-0b, %eax\n"
+            "ret\n"
+            // Save register that we don't want to clobber. On i386, we need to
+            // save relatively aggressively, as there are a couple or registers
+            // that are used internally (e.g. %ebx for position-independent
+            // code, and %ebp for the frame pointer), and as we need to keep at
+            // least a few registers available for the register allocator.
+          "1:push %esi; .cfi_adjust_cfa_offset 4\n"
+            "push %edi; .cfi_adjust_cfa_offset 4\n"
+            "push %ebx; .cfi_adjust_cfa_offset 4\n"
+            "push %ebp; .cfi_adjust_cfa_offset 4\n"
+            // Copy entries from the array holding the arguments into the
+            // correct CPU registers.
+            "movl  0(%edi), %ebx\n"
+            "movl  4(%edi), %ecx\n"
+            "movl  8(%edi), %edx\n"
+            "movl 12(%edi), %esi\n"
+            "movl 20(%edi), %ebp\n"
+            "movl 16(%edi), %edi\n"
+            // Enter the kernel.
+            "int  $0x80\n"
+            // This is our "magic" return address that the BPF filter sees.
+          "2:"
+            // Restore any clobbered registers that we didn't declare to the
+            // compiler.
+            "pop  %ebp; .cfi_adjust_cfa_offset -4\n"
+            "pop  %ebx; .cfi_adjust_cfa_offset -4\n"
+            "pop  %edi; .cfi_adjust_cfa_offset -4\n"
+            "pop  %esi; .cfi_adjust_cfa_offset -4\n"
+            "ret\n"
+            ".cfi_endproc\n"
+          "9:.size SyscallAsm, 9b-SyscallAsm\n"
+#elif defined(__x86_64__)
+            ".text\n"
+            ".align 16, 0x90\n"
+            ".type SyscallAsm, @function\n"
+ "SyscallAsm:.cfi_startproc\n"
+            // Check if "%rax" is negative. If so, do not attempt to make a
+            // system call. Instead, compute the return address that is visible
+            // to the kernel after we execute "syscall". This address can be
+            // used as a marker that BPF code inspects.
+            "test %rax, %rax\n"
+            "jge  1f\n"
+            // Always make sure that our code is position-independent, or the
+            // linker will throw a hissy fit on x86-64.
+            "call 0f;   .cfi_adjust_cfa_offset  8\n"
+          "0:pop  %rax; .cfi_adjust_cfa_offset -8\n"
+            "addq $2f-0b, %rax\n"
+            "ret\n"
+            // We declared all clobbered registers to the compiler. On x86-64,
+            // there really isn't much of a problem with register pressure. So,
+            // we can go ahead and directly copy the entries from the arguments
+            // array into the appropriate CPU registers.
+          "1:movq  0(%r12), %rdi\n"
+            "movq  8(%r12), %rsi\n"
+            "movq 16(%r12), %rdx\n"
+            "movq 24(%r12), %r10\n"
+            "movq 32(%r12), %r8\n"
+            "movq 40(%r12), %r9\n"
+            // Enter the kernel.
+            "syscall\n"
+            // This is our "magic" return address that the BPF filter sees.
+          "2:ret\n"
+            ".cfi_endproc\n"
+          "9:.size SyscallAsm, 9b-SyscallAsm\n"
+#elif defined(__arm__)
+            // Throughout this file, we use the same mode (ARM vs. thumb)
+            // that the C++ compiler uses. This means, when transfering control
+            // from C++ to assembly code, we do not need to switch modes (e.g.
+            // by using the "bx" instruction). It also means that our assembly
+            // code should not be invoked directly from code that lives in
+            // other compilation units, as we don't bother implementing thumb
+            // interworking. That's OK, as we don't make any of the assembly
+            // symbols public. They are all local to this file.
+            ".text\n"
+            ".align 2\n"
+            ".type SyscallAsm, %function\n"
+#if defined(__thumb__)
+            ".thumb_func\n"
+#else
+            ".arm\n"
+#endif
+ "SyscallAsm:.fnstart\n"
+            "@ args = 0, pretend = 0, frame = 8\n"
+            "@ frame_needed = 1, uses_anonymous_args = 0\n"
+#if defined(__thumb__)
+            ".cfi_startproc\n"
+            "push {r7, lr}\n"
+            ".cfi_offset 14, -4\n"
+            ".cfi_offset  7, -8\n"
+            "mov r7, sp\n"
+            ".cfi_def_cfa_register 7\n"
+            ".cfi_def_cfa_offset 8\n"
+#else
+            "stmfd sp!, {fp, lr}\n"
+            "add fp, sp, #4\n"
+#endif
+            // Check if "r0" is negative. If so, do not attempt to make a
+            // system call. Instead, compute the return address that is visible
+            // to the kernel after we execute "swi 0". This address can be
+            // used as a marker that BPF code inspects.
+            "cmp r0, #0\n"
+            "bge 1f\n"
+            "ldr r0, =2f\n"
+            "b   2f\n"
+            // We declared (almost) all clobbered registers to the compiler. On
+            // ARM there is no particular register pressure. So, we can go
+            // ahead and directly copy the entries from the arguments array
+            // into the appropriate CPU registers.
+          "1:ldr r5, [r6, #20]\n"
+            "ldr r4, [r6, #16]\n"
+            "ldr r3, [r6, #12]\n"
+            "ldr r2, [r6, #8]\n"
+            "ldr r1, [r6, #4]\n"
+            "mov r7, r0\n"
+            "ldr r0, [r6, #0]\n"
+            // Enter the kernel
+            "swi 0\n"
+            // Restore the frame pointer. Also restore the program counter from
+            // the link register; this makes us return to the caller.
+#if defined(__thumb__)
+          "2:pop {r7, pc}\n"
+            ".cfi_endproc\n"
+#else
+          "2:ldmfd sp!, {fp, pc}\n"
+#endif
+            ".fnend\n"
+          "9:.size SyscallAsm, 9b-SyscallAsm\n"
+#endif
+  );  // asm
+
+intptr_t Syscall(int nr, ...) {
+  // It is most convenient for the caller to pass a variadic list of arguments.
+  // But this is difficult to handle in assembly code without making
+  // assumptions about internal implementation details of "va_list". So, we
+  // first use C code to copy all the arguments into an array, where they are
+  // easily accessible to asm().
+  // This is preferable over copying them into individual variables, which
+  // can result in too much register pressure.
+  void *args[6];
+  va_list ap;
+
+  // System calls take a system call number (typically passed in %eax or
+  // %rax) and up to six arguments (passed in general-purpose CPU registers).
+  //
+  // On 32bit systems, all variadic arguments are passed on the stack as 32bit
+  // quantities. We can use an arbitrary 32bit type to retrieve them with
+  // va_arg() and then forward them to the kernel in the appropriate CPU
+  // register. We do not need to know whether this is an integer or a pointer
+  // value.
+  //
+  // On 64bit systems, variadic arguments can be either 32bit or 64bit wide,
+  // which would seem to make it more important that we pass the correct type
+  // to va_arg(). And we really can't know what this type is unless we have a
+  // table with function signatures for all system calls.
+  //
+  // Fortunately, on x86-64 this is less critical. The first six function
+  // arguments will be passed in CPU registers, no matter whether they were
+  // named or variadic. This only leaves us with a single argument (if present)
+  // that could be passed on the stack. And since x86-64 is little endian,
+  // it will have the correct value both for 32bit and 64bit quantities.
+  //
+  // N.B. Because of how the x86-64 ABI works, it is possible that 32bit
+  //   quantities will have undefined garbage bits in the upper 32 bits of a
+  //   64bit register. This is relatively unlikely for the first five system
+  //   call arguments, as the processor does automatic sign extensions and zero
+  //   filling so frequently, there rarely is garbage in CPU registers. But it
+  //   is quite likely for the last argument, which is passed on the stack.
+  //   That's generally OK, because the kernel has the correct function
+  //   signatures and knows to only inspect the LSB of a 32bit value.
+  //   But callers must be careful in cases, where the compiler cannot tell
+  //   the difference (e.g. when passing NULL to any system call, it must
+  //   always be cast to a pointer type).
+  //   The glibc implementation of syscall() has the exact same issues.
+  //   In the unlikely event that this ever becomes a problem, we could add
+  //   code that handles six-argument system calls specially. The number of
+  //   system calls that take six arguments and expect a 32bit value in the
+  //   sixth argument is very limited.
+  va_start(ap, nr);
+  args[0] = va_arg(ap, void *);
+  args[1] = va_arg(ap, void *);
+  args[2] = va_arg(ap, void *);
+  args[3] = va_arg(ap, void *);
+  args[4] = va_arg(ap, void *);
+  args[5] = va_arg(ap, void *);
+  va_end(ap);
+
+  // Invoke our file-scope assembly code. The constraints have been picked
+  // carefully to match what the rest of the assembly code expects in input,
+  // output, and clobbered registers.
+#if defined(__i386__)
+  intptr_t ret = nr;
+  asm volatile(
+    "call SyscallAsm\n"
+    // N.B. These are not the calling conventions normally used by the ABI.
+    : "=a"(ret)
+    : "0"(ret), "D"(args)
+    : "esp", "memory", "ecx", "edx");
+#elif defined(__x86_64__)
+  intptr_t ret = nr;
+  {
+    register void **data __asm__("r12") = args;
+    asm volatile(
+      "call SyscallAsm\n"
+      // N.B. These are not the calling conventions normally used by the ABI.
+      : "=a"(ret)
+      : "0"(ret), "r"(data)
+      : "rsp", "memory",
+        "rcx", "rdi", "rsi", "rdx", "r8", "r9", "r10", "r11");
+  }
+#elif defined(__arm__)
+  intptr_t ret;
+  {
+    register intptr_t inout __asm__("r0") = nr;
+    register void **data __asm__("r6") = args;
+    asm volatile(
+      "bl SyscallAsm\n"
+      // N.B. These are not the calling conventions normally used by the ABI.
+      : "=r"(inout)
+      : "0"(inout), "r"(data)
+      : "lr", "memory", "r1", "r2", "r3", "r4", "r5"
+#if !defined(__arm__)
+      // In thumb mode, we cannot use "r7" as a general purpose register, as
+      // it is our frame pointer. We have to manually manage and preserve it.
+      // In ARM mode, we have a dedicated frame pointer register and "r7" is
+      // thus available as a general purpose register. We don't preserve it,
+      // but instead mark it as clobbered.
+        , "r7"
+#endif
+      );
+    ret = inout;
+  }
+#else
+  errno = ENOSYS;
+  intptr_t ret = -1;
+#endif
+  return ret;
+}
+
+}  // namespace