Automatically fall back to non-low latency on open() failure.

media/audio/audio_output_resampler.cc

 // Copyright (c) 2012 The Chromium Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 
 #include "media/audio/audio_output_resampler.h"
 
 #include "base/bind.h"
 #include "base/bind_helpers.h"
 #include "base/compiler_specific.h"
 #include "base/message_loop.h"
 #include "base/metrics/histogram.h"
 #include "base/time.h"
 #include "media/audio/audio_io.h"
 #include "media/audio/audio_output_dispatcher_impl.h"
 #include "media/audio/audio_output_proxy.h"
 #include "media/audio/audio_util.h"
 #include "media/audio/sample_rates.h"
 #include "media/base/audio_pull_fifo.h"
 #include "media/base/limits.h"
 #include "media/base/multi_channel_resampler.h"
 
 namespace media {
 
+// Record UMA statistics for hardware output configuration.
 static void RecordStats(const AudioParameters& output_params) {
   UMA_HISTOGRAM_ENUMERATION(
       "Media.HardwareAudioBitsPerChannel", output_params.bits_per_sample(),
       limits::kMaxBitsPerSample);
   UMA_HISTOGRAM_ENUMERATION(
       "Media.HardwareAudioChannelLayout", output_params.channel_layout(),
       CHANNEL_LAYOUT_MAX);
   UMA_HISTOGRAM_ENUMERATION(
       "Media.HardwareAudioChannelCount", output_params.channels(),
       limits::kMaxChannels);
 
   AudioSampleRate asr = media::AsAudioSampleRate(output_params.sample_rate());
   if (asr != kUnexpectedAudioSampleRate) {
     UMA_HISTOGRAM_ENUMERATION(
         "Media.HardwareAudioSamplesPerSecond", asr, kUnexpectedAudioSampleRate);
   } else {
     UMA_HISTOGRAM_COUNTS(
         "Media.HardwareAudioSamplesPerSecondUnexpected",
         output_params.sample_rate());
   }
 }
 
+// Record UMA statistics for hardware output configuration after fallback.
+static void RecordFallbackStats(const AudioParameters& output_params) {
+  UMA_HISTOGRAM_ENUMERATION(
+      "Media.FallbackHardwareAudioBitsPerChannel",
+      output_params.bits_per_sample(), limits::kMaxBitsPerSample);
+  UMA_HISTOGRAM_ENUMERATION(
+      "Media.FallbackHardwareAudioChannelLayout",
+      output_params.channel_layout(), CHANNEL_LAYOUT_MAX);
+  UMA_HISTOGRAM_ENUMERATION(
+      "Media.FallbackHardwareAudioChannelCount",
+      output_params.channels(), limits::kMaxChannels);

[Chris Rogers, 2012/09/12 18:45:45]

Any chance we can record the buffer-size - frames_per_buffer()?
This seems like an important bit of information to have.

+
+  AudioSampleRate asr = media::AsAudioSampleRate(output_params.sample_rate());
+  if (asr != kUnexpectedAudioSampleRate) {
+    UMA_HISTOGRAM_ENUMERATION(
+        "Media.FallbackHardwareAudioSamplesPerSecond",
+        asr, kUnexpectedAudioSampleRate);
+  } else {
+    UMA_HISTOGRAM_COUNTS(
+        "Media.FallbackHardwareAudioSamplesPerSecondUnexpected",
+        output_params.sample_rate());
+  }
+}
+
 AudioOutputResampler::AudioOutputResampler(AudioManager* audio_manager,
                                            const AudioParameters& input_params,
                                            const AudioParameters& output_params,
                                            const base::TimeDelta& close_delay)
     : AudioOutputDispatcher(audio_manager, input_params),
       source_callback_(NULL),
       io_ratio_(1),
-      input_bytes_per_frame_(input_params.GetBytesPerFrame()),
-      output_bytes_per_frame_(output_params.GetBytesPerFrame()),
-      outstanding_audio_bytes_(0) {
+      close_delay_(close_delay),
+      outstanding_audio_bytes_(0),
+      output_params_(output_params) {
+  Initialize();
+  // Record UMA statistics for the hardware configuration.
+  RecordStats(output_params_);
+}
+
+AudioOutputResampler::~AudioOutputResampler() {}
+
+void AudioOutputResampler::Initialize() {
+  io_ratio_ = 1;
+
   // TODO(dalecurtis): Add channel remixing.  http://crbug.com/138762
-  DCHECK_EQ(input_params.channels(), output_params.channels());
+  DCHECK_EQ(params_.channels(), output_params_.channels());
   // Only resample or rebuffer if the input parameters don't match the output
   // parameters to avoid any unnecessary work.
-  if (input_params.channels() != output_params.channels() ||
-      input_params.sample_rate() != output_params.sample_rate() ||
-      input_params.bits_per_sample() != output_params.bits_per_sample() ||
-      input_params.frames_per_buffer() != output_params.frames_per_buffer()) {
+  if (params_.channels() != output_params_.channels() ||
+      params_.sample_rate() != output_params_.sample_rate() ||
+      params_.bits_per_sample() != output_params_.bits_per_sample() ||
+      params_.frames_per_buffer() != output_params_.frames_per_buffer()) {
     // Only resample if necessary since it's expensive.
-    if (input_params.sample_rate() != output_params.sample_rate()) {
-      DVLOG(1) << "Resampling from " << input_params.sample_rate() << " to "
-               << output_params.sample_rate();
-      double io_sample_rate_ratio = input_params.sample_rate() /
-          static_cast<double>(output_params.sample_rate());
+    if (params_.sample_rate() != output_params_.sample_rate()) {
+      DVLOG(1) << "Resampling from " << params_.sample_rate() << " to "
+               << output_params_.sample_rate();
+      double io_sample_rate_ratio = params_.sample_rate() /
+          static_cast<double>(output_params_.sample_rate());
       // Include the I/O resampling ratio in our global I/O ratio.
       io_ratio_ *= io_sample_rate_ratio;
       resampler_.reset(new MultiChannelResampler(
-          output_params.channels(), io_sample_rate_ratio, base::Bind(
+          output_params_.channels(), io_sample_rate_ratio, base::Bind(
               &AudioOutputResampler::ProvideInput, base::Unretained(this))));
     }
 
     // Include bits per channel differences.
-    io_ratio_ *= static_cast<double>(input_params.bits_per_sample()) /
-        output_params.bits_per_sample();
+    io_ratio_ *= static_cast<double>(params_.bits_per_sample()) /
+        output_params_.bits_per_sample();
 
     // Include channel count differences.
-    io_ratio_ *= static_cast<double>(input_params.channels()) /
-        output_params.channels();
+    io_ratio_ *= static_cast<double>(params_.channels()) /
+        output_params_.channels();
 
     // Since the resampler / output device may want a different buffer size than
     // the caller asked for, we need to use a FIFO to ensure that both sides
     // read in chunk sizes they're configured for.
-    if (input_params.sample_rate() != output_params.sample_rate() ||
-        input_params.frames_per_buffer() != output_params.frames_per_buffer()) {
-      DVLOG(1) << "Rebuffering from " << input_params.frames_per_buffer()
-               << " to " << output_params.frames_per_buffer();
+    if (params_.sample_rate() != output_params_.sample_rate() ||
+        params_.frames_per_buffer() != output_params_.frames_per_buffer()) {
+      DVLOG(1) << "Rebuffering from " << params_.frames_per_buffer()
+               << " to " << output_params_.frames_per_buffer();
       audio_fifo_.reset(new AudioPullFifo(
-          input_params.channels(), input_params.frames_per_buffer(), base::Bind(
+          params_.channels(), params_.frames_per_buffer(), base::Bind(
               &AudioOutputResampler::SourceCallback_Locked,
               base::Unretained(this))));
     }
 
     DVLOG(1) << "I/O ratio is " << io_ratio_;
   }
 
   // TODO(dalecurtis): All this code should be merged into AudioOutputMixer once
   // we've stabilized the issues there.
   dispatcher_ = new AudioOutputDispatcherImpl(
-      audio_manager, output_params, close_delay);
-
-  // Record UMA statistics for the hardware configuration.
-  RecordStats(output_params);
+      audio_manager_, output_params_, close_delay_);
 }
 
-AudioOutputResampler::~AudioOutputResampler() {}
+bool AudioOutputResampler::OpenStream() {
+  if (dispatcher_->OpenStream()) {
+    UMA_HISTOGRAM_BOOLEAN("Media.FallbackToHighLatencyAudioPath", false);
+    return true;
+  }
 
-bool AudioOutputResampler::OpenStream() {
-  // TODO(dalecurtis): Automatically revert to high latency path if OpenStream()
-  // fails; use default high latency output values + rebuffering / resampling.
+  // If we've already tried to open the stream in high latency mode, there's
+  // nothing more to be done.
+  if (output_params_.format() == AudioParameters::AUDIO_PCM_LINEAR)
+    return false;
+
+  DLOG(ERROR) << "Unable to open audio device in low latency mode.  Falling "
+              << "back to high latency audio output.";
+
+  // Record UMA statistics about the hardware which triggered the failure so we
+  // can debug and triage later.
+  UMA_HISTOGRAM_BOOLEAN("Media.FallbackToHighLatencyAudioPath", true);
+  RecordFallbackStats(output_params_);
+
+  // Open failed!  Attempt to open the output device in high latency mode using
+  // a new high latency appropriate buffer size.  |kMinLowLatencyFrameSize| is
+  // arbitrarily based on Pepper Flash's MAXIMUM frame size for low latency.
+  static const int kMinLowLatencyFrameSize = 2048;
+  int frames_per_buffer = std::max(
+      std::min(params_.frames_per_buffer(), kMinLowLatencyFrameSize),
+      static_cast<int>(GetHighLatencyOutputBufferSize(params_.sample_rate())));
+
+  output_params_ = AudioParameters(
+      AudioParameters::AUDIO_PCM_LINEAR, params_.channel_layout(),
+      params_.sample_rate(), params_.bits_per_sample(), frames_per_buffer);
+  Initialize();
+
+  // Retry, if this fails, there's nothing left to do but report the error back.
   return dispatcher_->OpenStream();
 }
 
 bool AudioOutputResampler::StartStream(
     AudioOutputStream::AudioSourceCallback* callback,
     AudioOutputProxy* stream_proxy) {
   {
     base::AutoLock auto_lock(source_lock_);
     source_callback_ = callback;
   }
@@ skipping 53 matching lines @@
     SourceCallback_Locked(dest);
     return dest->frames();
   }
 
   if (resampler_.get())
     resampler_->Resample(dest, dest->frames());
   else
     ProvideInput(dest);
 
   // Calculate how much data is left in the internal FIFO and resampler buffers.
-  outstanding_audio_bytes_ -= dest->frames() * output_bytes_per_frame_;
+  outstanding_audio_bytes_ -=
+      dest->frames() * output_params_.GetBytesPerFrame();
+
   // Due to rounding errors while multiplying against |io_ratio_|,
   // |outstanding_audio_bytes_| might (rarely) slip below zero.
   if (outstanding_audio_bytes_ < 0) {
     DLOG(ERROR) << "Outstanding audio bytes went negative! Value: "
                 << outstanding_audio_bytes_;
     outstanding_audio_bytes_ = 0;
   }
 
   // Always return the full number of frames requested, ProvideInput() will pad
   // with silence if it wasn't able to acquire enough data.
@@ skipping 11 matching lines @@
       (current_buffers_state_.total_bytes() + outstanding_audio_bytes_);
 
   // Retrieve data from the original callback.  Zero any unfilled frames.
   int frames = source_callback_->OnMoreData(audio_bus, new_buffers_state);
   if (frames < audio_bus->frames())
     audio_bus->ZeroFramesPartial(frames, audio_bus->frames() - frames);
 
   // Scale the number of frames we got back in terms of input bytes to output
   // bytes accordingly.
   outstanding_audio_bytes_ +=
-      (audio_bus->frames() * input_bytes_per_frame_) / io_ratio_;
+      (audio_bus->frames() * params_.GetBytesPerFrame()) / io_ratio_;
 }
 
 void AudioOutputResampler::ProvideInput(AudioBus* audio_bus) {
   audio_fifo_->Consume(audio_bus, audio_bus->frames());
 }
 
 void AudioOutputResampler::OnError(AudioOutputStream* stream, int code) {
   base::AutoLock auto_lock(source_lock_);
   if (source_callback_)
     source_callback_->OnError(stream, code);
 }
 
 void AudioOutputResampler::WaitTillDataReady() {
   base::AutoLock auto_lock(source_lock_);
   if (source_callback_ && !outstanding_audio_bytes_)
     source_callback_->WaitTillDataReady();
 }
 
 }  // namespace media