Index: bison/src/bison/2.4.1/bison-2.4.1/lib/Makefile |
=================================================================== |
--- bison/src/bison/2.4.1/bison-2.4.1/lib/Makefile (revision 0) |
+++ bison/src/bison/2.4.1/bison-2.4.1/lib/Makefile (revision 0) |
@@ -0,0 +1,1518 @@ |
+# Makefile.in generated by automake 1.10.1 from Makefile.am. |
+# lib/Makefile. Generated from Makefile.in by configure. |
+ |
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. |
+# This Makefile.in is free software; the Free Software Foundation |
+# gives unlimited permission to copy and/or distribute it, |
+# with or without modifications, as long as this notice is preserved. |
+ |
+# This program is distributed in the hope that it will be useful, |
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
+# PARTICULAR PURPOSE. |
+ |
+ |
+ |
+# Make bison/lib. |
+ |
+# Copyright (C) 2001, 2002, 2003, 2004, 2006, 2008 Free Software Foundation, |
+# Inc. |
+ |
+# This program is free software: you can redistribute it and/or modify |
+# it under the terms of the GNU General Public License as published by |
+# the Free Software Foundation, either version 3 of the License, or |
+# (at your option) any later version. |
+# |
+# This program is distributed in the hope that it will be useful, |
+# but WITHOUT ANY WARRANTY; without even the implied warranty of |
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
+# GNU General Public License for more details. |
+# |
+# You should have received a copy of the GNU General Public License |
+# along with this program. If not, see <http://www.gnu.org/licenses/>. |
+ |
+# Copyright (C) 2002-2008 Free Software Foundation, Inc. |
+# |
+# This file is free software, distributed under the terms of the GNU |
+# General Public License. As a special exception to the GNU General |
+# Public License, this file may be distributed as part of a program |
+# that contains a configuration script generated by Autoconf, under |
+# the same distribution terms as the rest of that program. |
+# |
+# Generated by gnulib-tool. |
+# Reproduce by: gnulib-tool --import --dir=. --local-dir=gl --lib=libbison --source-base=lib --m4-base=m4 --doc-base=doc --tests-base=tests --aux-dir=build-aux --no-libtool --macro-prefix=gl announce-gen argmatch c-strcase config-h configmake dirname error extensions fopen-safer getopt gettext git-version-gen gnumakefile hash inttypes javacomp-script javaexec-script malloc mbswidth obstack quote quotearg stdbool stpcpy strerror strtoul strverscmp unistd unistd-safer unlocked-io unsetenv verify warnings xalloc xalloc-die xstrndup |
+ |
+ |
+ |
+VPATH = ../../bison-2.4.1-src/lib |
+pkgdatadir = $(datadir)/bison |
+pkglibdir = $(libdir)/bison |
+pkgincludedir = $(includedir)/bison |
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
+install_sh_DATA = $(install_sh) -c -m 644 |
+install_sh_PROGRAM = $(install_sh) -c |
+install_sh_SCRIPT = $(install_sh) -c |
+INSTALL_HEADER = $(INSTALL_DATA) |
+transform = $(program_transform_name) |
+NORMAL_INSTALL = : |
+PRE_INSTALL = : |
+POST_INSTALL = : |
+NORMAL_UNINSTALL = : |
+PRE_UNINSTALL = : |
+POST_UNINSTALL = : |
+build_triplet = i386-pc-mingw32 |
+host_triplet = i386-pc-mingw32 |
+DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ |
+ $(srcdir)/Makefile.in $(srcdir)/config.hin $(srcdir)/gnulib.mk |
+subdir = lib |
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
+am__aclocal_m4_deps = $(top_srcdir)/m4/argmatch.m4 \ |
+ $(top_srcdir)/m4/bison-i18n.m4 $(top_srcdir)/m4/c-working.m4 \ |
+ $(top_srcdir)/m4/config-h.m4 $(top_srcdir)/m4/cxx.m4 \ |
+ $(top_srcdir)/m4/dirname.m4 $(top_srcdir)/m4/dmalloc.m4 \ |
+ $(top_srcdir)/m4/dos.m4 $(top_srcdir)/m4/double-slash-root.m4 \ |
+ $(top_srcdir)/m4/environ.m4 $(top_srcdir)/m4/errno_h.m4 \ |
+ $(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exitfail.m4 \ |
+ $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/getopt.m4 \ |
+ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gnulib-common.m4 \ |
+ $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/hash.m4 \ |
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/include_next.m4 \ |
+ $(top_srcdir)/m4/inline.m4 $(top_srcdir)/m4/intlmacosx.m4 \ |
+ $(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \ |
+ $(top_srcdir)/m4/javacomp.m4 $(top_srcdir)/m4/javaexec.m4 \ |
+ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ |
+ $(top_srcdir)/m4/lib-prefix.m4 \ |
+ $(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/longlong.m4 \ |
+ $(top_srcdir)/m4/m4.m4 $(top_srcdir)/m4/malloc.m4 \ |
+ $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbstate_t.m4 \ |
+ $(top_srcdir)/m4/mbswidth.m4 $(top_srcdir)/m4/nls.m4 \ |
+ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ |
+ $(top_srcdir)/m4/quote.m4 $(top_srcdir)/m4/quotearg.m4 \ |
+ $(top_srcdir)/m4/setenv.m4 $(top_srcdir)/m4/stdbool.m4 \ |
+ $(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdio-safer.m4 \ |
+ $(top_srcdir)/m4/stdlib_h.m4 $(top_srcdir)/m4/stpcpy.m4 \ |
+ $(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \ |
+ $(top_srcdir)/m4/strndup.m4 $(top_srcdir)/m4/strnlen.m4 \ |
+ $(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/strtoul.m4 \ |
+ $(top_srcdir)/m4/strverscmp.m4 $(top_srcdir)/m4/subpipe.m4 \ |
+ $(top_srcdir)/m4/timevar.m4 $(top_srcdir)/m4/unistd-safer.m4 \ |
+ $(top_srcdir)/m4/unistd_h.m4 $(top_srcdir)/m4/unlocked-io.m4 \ |
+ $(top_srcdir)/m4/warnings.m4 $(top_srcdir)/m4/wchar.m4 \ |
+ $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype.m4 \ |
+ $(top_srcdir)/m4/wcwidth.m4 $(top_srcdir)/m4/wint_t.m4 \ |
+ $(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/xstrndup.m4 \ |
+ $(top_srcdir)/configure.ac |
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
+ $(ACLOCAL_M4) |
+mkinstalldirs = $(install_sh) -d |
+CONFIG_HEADER = config.h |
+CONFIG_CLEAN_FILES = |
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
+am__vpath_adj = case $$p in \ |
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
+ *) f=$$p;; \ |
+ esac; |
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
+am__installdirs = "$(DESTDIR)$(libdir)" |
+libLIBRARIES_INSTALL = $(INSTALL_DATA) |
+LIBRARIES = $(lib_LIBRARIES) $(noinst_LIBRARIES) |
+AR = ar |
+ARFLAGS = cru |
+libbison_a_AR = $(AR) $(ARFLAGS) |
+am__DEPENDENCIES_1 = |
+am__dirstamp = $(am__leading_dot)dirstamp |
+am__objects_1 = abitset.$(OBJEXT) bitset.$(OBJEXT) \ |
+ bitset_stats.$(OBJEXT) bitsetv.$(OBJEXT) ebitset.$(OBJEXT) \ |
+ lbitset.$(OBJEXT) vbitset.$(OBJEXT) |
+am__objects_2 = bitsetv-print.$(OBJEXT) |
+am__objects_3 = timevar.$(OBJEXT) |
+am_libbison_a_OBJECTS = c-ctype.$(OBJEXT) c-strcasecmp.$(OBJEXT) \ |
+ c-strncasecmp.$(OBJEXT) localcharset.$(OBJEXT) \ |
+ mbswidth.$(OBJEXT) uniwidth/width.$(OBJEXT) \ |
+ xalloc-die.$(OBJEXT) xstrndup.$(OBJEXT) get-errno.$(OBJEXT) \ |
+ subpipe.$(OBJEXT) $(am__objects_1) $(am__objects_2) \ |
+ $(am__objects_3) \ |
+ progname.$(OBJEXT) progreloc.$(OBJEXT) relocatable.$(OBJEXT) |
+libbison_a_OBJECTS = $(am_libbison_a_OBJECTS) |
+liby_a_AR = $(AR) $(ARFLAGS) |
+liby_a_LIBADD = |
+am_liby_a_OBJECTS = main.$(OBJEXT) yyerror.$(OBJEXT) |
+liby_a_OBJECTS = $(am_liby_a_OBJECTS) |
+LTLIBRARIES = $(noinst_LTLIBRARIES) |
+DEFAULT_INCLUDES = -I. -I$(srcdir) |
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp |
+am__depfiles_maybe = depfiles |
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
+CCLD = $(CC) |
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ |
+SOURCES = $(libbison_a_SOURCES) $(EXTRA_libbison_a_SOURCES) \ |
+ $(liby_a_SOURCES) |
+DIST_SOURCES = $(libbison_a_SOURCES) $(EXTRA_libbison_a_SOURCES) \ |
+ $(liby_a_SOURCES) |
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
+ html-recursive info-recursive install-data-recursive \ |
+ install-dvi-recursive install-exec-recursive \ |
+ install-html-recursive install-info-recursive \ |
+ install-pdf-recursive install-ps-recursive install-recursive \ |
+ installcheck-recursive installdirs-recursive pdf-recursive \ |
+ ps-recursive uninstall-recursive |
+HEADERS = $(noinst_HEADERS) |
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
+ distclean-recursive maintainer-clean-recursive |
+ETAGS = etags |
+CTAGS = ctags |
+DIST_SUBDIRS = $(SUBDIRS) |
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
+ACLOCAL = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run aclocal-1.10 |
+AMTAR = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run tar |
+AUTOCONF = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run autoconf |
+AUTOHEADER = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run autoheader |
+AUTOM4TE = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run autom4te |
+AUTOMAKE = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run automake-1.10 |
+AWK = gawk |
+BISON_CXX_WORKS = : |
+BISON_LOCALEDIR = /usr/share/locale |
+BITSIZEOF_PTRDIFF_T = |
+BITSIZEOF_SIG_ATOMIC_T = |
+BITSIZEOF_SIZE_T = |
+BITSIZEOF_WCHAR_T = |
+BITSIZEOF_WINT_T = |
+CC = gcc -std=gnu99 |
+CCDEPMODE = depmode=gcc3 |
+CFLAGS = -Wall -Wpointer-arith -O3 -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math -Wstrict-prototypes |
+CLASSPATH = D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\dbexamples.jar;D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\db.jar;D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\debug\dbexamples.jar;D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\debug\db.jar |
+CLASSPATH_SEPARATOR = ; |
+CONF_JAVA = gij |
+CONF_JAVAC = |
+CPP = gcc -std=gnu99 -E |
+CPPFLAGS = -D__USE_MINGW_ACCESS -D_LARGEFILE_SOURCE=1 -D_LARGEFILE64_SOURCE=1 -D_FILE_OFFSET_BITS=64 -DENABLE_RELOCATABLE -DINSTALLPREFIX=\"$(prefix)\" -DINSTALLDIR=\"$(bindir)\" -DEXEEXT=\"$(EXEEXT)\" -DNO_XMALLOC -ID:/Progra~1/GnuWin32/include |
+CXX = g++ |
+CXXDEPMODE = depmode=gcc3 |
+CXXFLAGS = -Wall -Wpointer-arith -O3 -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math -fconserve-space -fno-rtti -D__STDC_LIMIT_MACROS |
+CYGPATH_W = cygpath -w |
+DEFS = |
+DEPDIR = .deps |
+ECHO_C = |
+ECHO_N = -n |
+ECHO_T = |
+EGREP = /usr/bin/grep -E |
+EMULTIHOP_HIDDEN = 0 |
+EMULTIHOP_VALUE = |
+ENOLINK_HIDDEN = 0 |
+ENOLINK_VALUE = |
+EOVERFLOW_HIDDEN = 0 |
+EOVERFLOW_VALUE = |
+ERRNO_H = errno.h |
+EXEEXT = .exe |
+GCC = yes |
+GETOPT_H = |
+GETTEXT_MACRO_VERSION = 0.17 |
+GLIBC21 = no |
+GMSGFMT = /usr/bin/msgfmt |
+GMSGFMT_015 = /usr/bin/msgfmt |
+GNULIB_ATOLL = 0 |
+GNULIB_CALLOC_POSIX = 0 |
+GNULIB_CHOWN = 0 |
+GNULIB_CLOSE = 0 |
+GNULIB_DUP2 = 0 |
+GNULIB_ENVIRON = 1 |
+GNULIB_EUIDACCESS = 0 |
+GNULIB_FCHDIR = 0 |
+GNULIB_FSYNC = 0 |
+GNULIB_FTRUNCATE = 0 |
+GNULIB_GETCWD = 0 |
+GNULIB_GETDOMAINNAME = 0 |
+GNULIB_GETDTABLESIZE = 0 |
+GNULIB_GETHOSTNAME = 0 |
+GNULIB_GETLOADAVG = 0 |
+GNULIB_GETLOGIN_R = 0 |
+GNULIB_GETPAGESIZE = 0 |
+GNULIB_GETSUBOPT = 0 |
+GNULIB_GETUSERSHELL = 0 |
+GNULIB_IMAXABS = 0 |
+GNULIB_IMAXDIV = 0 |
+GNULIB_LCHOWN = 0 |
+GNULIB_LSEEK = 0 |
+GNULIB_MALLOC_POSIX = 1 |
+GNULIB_MBSCASECMP = 0 |
+GNULIB_MBSCASESTR = 0 |
+GNULIB_MBSCHR = 0 |
+GNULIB_MBSCSPN = 0 |
+GNULIB_MBSLEN = 0 |
+GNULIB_MBSNCASECMP = 0 |
+GNULIB_MBSNLEN = 0 |
+GNULIB_MBSPBRK = 0 |
+GNULIB_MBSPCASECMP = 0 |
+GNULIB_MBSRCHR = 0 |
+GNULIB_MBSSEP = 0 |
+GNULIB_MBSSPN = 0 |
+GNULIB_MBSSTR = 0 |
+GNULIB_MBSTOK_R = 0 |
+GNULIB_MEMMEM = 0 |
+GNULIB_MEMPCPY = 0 |
+GNULIB_MEMRCHR = 0 |
+GNULIB_MKDTEMP = 0 |
+GNULIB_MKSTEMP = 0 |
+GNULIB_PUTENV = 0 |
+GNULIB_RANDOM_R = 0 |
+GNULIB_RAWMEMCHR = 0 |
+GNULIB_READLINK = 0 |
+GNULIB_REALLOC_POSIX = 0 |
+GNULIB_RPMATCH = 0 |
+GNULIB_SETENV = 0 |
+GNULIB_SLEEP = 0 |
+GNULIB_STPCPY = 1 |
+GNULIB_STPNCPY = 0 |
+GNULIB_STRCASESTR = 0 |
+GNULIB_STRCHRNUL = 0 |
+GNULIB_STRDUP = 0 |
+GNULIB_STRERROR = 1 |
+GNULIB_STRNDUP = 1 |
+GNULIB_STRNLEN = 1 |
+GNULIB_STRPBRK = 0 |
+GNULIB_STRSEP = 0 |
+GNULIB_STRSIGNAL = 0 |
+GNULIB_STRSTR = 0 |
+GNULIB_STRTOD = 0 |
+GNULIB_STRTOIMAX = 0 |
+GNULIB_STRTOK_R = 0 |
+GNULIB_STRTOLL = 0 |
+GNULIB_STRTOULL = 0 |
+GNULIB_STRTOUMAX = 0 |
+GNULIB_STRVERSCMP = 1 |
+GNULIB_UNISTD_H_SIGPIPE = 0 |
+GNULIB_UNSETENV = 1 |
+GNULIB_WCWIDTH = 1 |
+GNULIB_WRITE = 0 |
+GREP = /usr/bin/grep |
+HAVE_ATOLL = 1 |
+HAVE_CALLOC_POSIX = 1 |
+HAVE_DECL_ENVIRON = 0 |
+HAVE_DECL_GETLOADAVG = 1 |
+HAVE_DECL_GETLOGIN_R = 1 |
+HAVE_DECL_IMAXABS = 1 |
+HAVE_DECL_IMAXDIV = 1 |
+HAVE_DECL_MEMMEM = 1 |
+HAVE_DECL_MEMRCHR = 1 |
+HAVE_DECL_STRDUP = 1 |
+HAVE_DECL_STRERROR = 1 |
+HAVE_DECL_STRNDUP = 0 |
+HAVE_DECL_STRNLEN = 0 |
+HAVE_DECL_STRSIGNAL = 1 |
+HAVE_DECL_STRTOIMAX = 1 |
+HAVE_DECL_STRTOK_R = 1 |
+HAVE_DECL_STRTOUMAX = 1 |
+HAVE_DECL_WCWIDTH = 0 |
+HAVE_DUP2 = 1 |
+HAVE_EUIDACCESS = 1 |
+HAVE_FSYNC = 1 |
+HAVE_FTRUNCATE = 1 |
+HAVE_GCJ_C = |
+HAVE_GCJ_IN_PATH = yes |
+HAVE_GETDOMAINNAME = 1 |
+HAVE_GETDTABLESIZE = 1 |
+HAVE_GETHOSTNAME = 1 |
+HAVE_GETPAGESIZE = 1 |
+HAVE_GETSUBOPT = 1 |
+HAVE_GETUSERSHELL = 1 |
+HAVE_GIJ = 1 |
+HAVE_GIJ_IN_PATH = yes |
+HAVE_INTTYPES_H = 1 |
+HAVE_ISWCNTRL = 1 |
+HAVE_JAVA = |
+HAVE_JAVAC = |
+HAVE_JAVAC_ENVVAR = |
+HAVE_JAVAC_IN_PATH = |
+HAVE_JAVA_ENVVAR = |
+HAVE_JAVA_IN_PATH = yes |
+HAVE_JIKES = |
+HAVE_JIKES_IN_PATH = |
+HAVE_JRE = |
+HAVE_JRE_IN_PATH = |
+HAVE_JVIEW = |
+HAVE_JVIEW_IN_PATH = yes |
+HAVE_LONG_LONG_INT = 1 |
+HAVE_MALLOC_POSIX = 0 |
+HAVE_MEMPCPY = 1 |
+HAVE_MKDTEMP = 1 |
+HAVE_OS_H = 0 |
+HAVE_RANDOM_R = 1 |
+HAVE_RAWMEMCHR = 1 |
+HAVE_READLINK = 1 |
+HAVE_REALLOC_POSIX = 1 |
+HAVE_RPMATCH = 1 |
+HAVE_SETENV = 1 |
+HAVE_SIGNED_SIG_ATOMIC_T = |
+HAVE_SIGNED_WCHAR_T = |
+HAVE_SIGNED_WINT_T = |
+HAVE_SLEEP = 1 |
+HAVE_STDINT_H = 1 |
+HAVE_STPCPY = 0 |
+HAVE_STPNCPY = 1 |
+HAVE_STRCASESTR = 1 |
+HAVE_STRCHRNUL = 1 |
+HAVE_STRNDUP = 0 |
+HAVE_STRPBRK = 1 |
+HAVE_STRSEP = 1 |
+HAVE_STRTOD = 1 |
+HAVE_STRTOLL = 1 |
+HAVE_STRTOULL = 1 |
+HAVE_STRUCT_RANDOM_DATA = 0 |
+HAVE_STRVERSCMP = 0 |
+HAVE_SYS_BITYPES_H = |
+HAVE_SYS_INTTYPES_H = |
+HAVE_SYS_LOADAVG_H = 0 |
+HAVE_SYS_PARAM_H = 0 |
+HAVE_SYS_TYPES_H = 1 |
+HAVE_UNISTD_H = 1 |
+HAVE_UNSETENV = 0 |
+HAVE_UNSIGNED_LONG_LONG_INT = 1 |
+HAVE_WCHAR_H = 1 |
+HAVE_WCTYPE_H = 1 |
+HAVE_WINT_T = 1 |
+HAVE__BOOL = 1 |
+HELP2MAN = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run help2man |
+INCLUDE_NEXT = include_next |
+INCLUDE_NEXT_AS_FIRST_DIRECTIVE = include_next |
+INSTALL = /bin/install.exe -cp |
+INSTALL_DATA = /bin/install.exe -cp |
+INSTALL_PROGRAM = /bin/install.exe -cp |
+INSTALL_SCRIPT = ${INSTALL} |
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s |
+INT32_MAX_LT_INTMAX_MAX = 1 |
+INT64_MAX_EQ_LONG_MAX = 0 |
+INTLLIBS = D:/Progra~1/GnuWin32/lib/libintl.dll.a -LD:/Progra~1/GnuWin32/lib |
+INTL_MACOSX_LIBS = |
+INTTYPES_H = inttypes.h |
+LDFLAGS = -Wl,-s -Wl,--force-exe-suffix -Wl,--enable-auto-import -Wl,--enable-runtime-pseudo-reloc -Wl,--allow-multiple-definition -Wl,--enable-stdcall-fixup -LD:/Progra~1/GnuWin32/lib |
+LEX = flex |
+LEXLIB = |
+LEX_OUTPUT_ROOT = lex.yy |
+LIBBISON_LIBDEPS = |
+LIBBISON_LTLIBDEPS = |
+LIBICONV = D:/Progra~1/GnuWin32/lib/libiconv.dll.a -LD:/Progra~1/GnuWin32/lib |
+LIBINTL = D:/Progra~1/GnuWin32/lib/libintl.dll.a -LD:/Progra~1/GnuWin32/lib |
+LIBOBJS = |
+LIBS = -Wl,-s -LD:/Progra~1/GnuWin32/lib -lintl -lwsock32 -lole32 -luuid -lmsvcp60 |
+LOCALCHARSET_TESTS_ENVIRONMENT = CHARSETALIASDIR="$(top_builddir)/lib" |
+LTLIBICONV = -LD:/Progra~1/GnuWin32/lib -liconv -RD:/Progra~1/GnuWin32/lib |
+LTLIBINTL = -LD:/Progra~1/GnuWin32/lib -lintl -RD:/Progra~1/GnuWin32/lib |
+LTLIBOBJS = |
+M4 = /usr/bin/m4 |
+MAKEINFO = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run makeinfo |
+MKDIR_P = /usr/bin/mkdir -p |
+MSGFMT = /usr/bin/msgfmt |
+MSGFMT_015 = /usr/bin/msgfmt |
+MSGMERGE = /usr/bin/msgmerge |
+NEXT_ERRNO_H = <errno.h> |
+NEXT_INTTYPES_H = <inttypes.h> |
+NEXT_STDINT_H = <stdint.h> |
+NEXT_STDLIB_H = <stdlib.h> |
+NEXT_STRING_H = <string.h> |
+NEXT_UNISTD_H = <unistd.h> |
+NEXT_WCHAR_H = <wchar.h> |
+NEXT_WCTYPE_H = <wctype.h> |
+O0CFLAGS = -Wall -Wpointer-arith -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math -Wstrict-prototypes |
+O0CXXFLAGS = -Wall -Wpointer-arith -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math -fconserve-space -fno-rtti -D__STDC_LIMIT_MACROS |
+OBJEXT = o |
+PACKAGE = bison |
+PACKAGE_BUGREPORT = bug-bison@gnu.org |
+PACKAGE_COPYRIGHT_YEAR = 2008 |
+PACKAGE_NAME = GNU Bison |
+PACKAGE_STRING = GNU Bison 2.4.1 |
+PACKAGE_TARNAME = bison |
+PACKAGE_VERSION = 2.4.1 |
+PATH_SEPARATOR = : |
+POSUB = po |
+PRAGMA_SYSTEM_HEADER = #pragma GCC system_header |
+PRIPTR_PREFIX = "" |
+PRI_MACROS_BROKEN = 0 |
+PTRDIFF_T_SUFFIX = |
+RANLIB = ranlib |
+REPLACE_CHOWN = 0 |
+REPLACE_CLOSE = 0 |
+REPLACE_FCHDIR = 0 |
+REPLACE_GETCWD = 0 |
+REPLACE_GETPAGESIZE = 0 |
+REPLACE_ISWCNTRL = 0 |
+REPLACE_LCHOWN = 0 |
+REPLACE_LSEEK = 0 |
+REPLACE_MEMMEM = 0 |
+REPLACE_MKSTEMP = 0 |
+REPLACE_PUTENV = 0 |
+REPLACE_STRCASESTR = 0 |
+REPLACE_STRDUP = 0 |
+REPLACE_STRERROR = 1 |
+REPLACE_STRSIGNAL = 0 |
+REPLACE_STRSTR = 0 |
+REPLACE_STRTOD = 0 |
+REPLACE_WCWIDTH = 1 |
+REPLACE_WRITE = 0 |
+SET_MAKE = |
+SHELL = /bin/sh |
+SIG_ATOMIC_T_SUFFIX = |
+SIZE_T_SUFFIX = |
+STDBOOL_H = |
+STDINT_H = |
+STRIP = |
+UINT32_MAX_LT_UINTMAX_MAX = 1 |
+UINT64_MAX_EQ_ULONG_MAX = 0 |
+UNISTD_H_HAVE_WINSOCK2_H = 0 |
+USE_NLS = yes |
+VALGRIND = |
+VERSION = 2.4.1 |
+VOID_UNSETENV = 0 |
+WARN_CFLAGS = |
+WARN_CXXFLAGS = |
+WCHAR_H = wchar.h |
+WCHAR_T_SUFFIX = |
+WCTYPE_H = |
+WERROR_CFLAGS = |
+WINT_T_SUFFIX = |
+XGETTEXT = /usr/bin/xgettext |
+XGETTEXT_015 = /usr/bin/xgettext |
+XGETTEXT_EXTRA_OPTIONS = --flag=error:3:c-format --flag=error_at_line:5:c-format |
+XSLTPROC = |
+YACC = bison -y |
+YACC_LIBRARY = liby.a |
+YACC_SCRIPT = yacc |
+YFLAGS = |
+abs_builddir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1/lib |
+abs_srcdir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1/../bison-2.4.1-src/lib |
+abs_top_builddir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1 |
+abs_top_srcdir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1/../bison-2.4.1-src |
+ac_ct_CC = gcc |
+ac_ct_CXX = |
+aclocaldir = ${datadir}/aclocal |
+am__include = include |
+am__leading_dot = . |
+am__quote = |
+am__tar = ${AMTAR} chof - "$$tardir" |
+am__untar = ${AMTAR} xf - |
+bindir = ${exec_prefix}/bin |
+build = i386-pc-mingw32 |
+build_alias = i386-pc-mingw32 |
+build_cpu = i386 |
+build_os = mingw32 |
+build_vendor = pc |
+builddir = . |
+datadir = ${datarootdir} |
+datarootdir = ${prefix}/share |
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} |
+dvidir = ${docdir} |
+exec_prefix = ${prefix} |
+gl_LIBOBJS = argmatch.o basename.o dirname.o dup-safer.o error.o exitfail.o fd-safer.o fopen-safer.o hash.o malloc.o obstack.o pipe-safer.o quote.o quotearg.o stpcpy.o strerror.o stripslash.o strndup.o strnlen.o strverscmp.o unsetenv.o wcwidth.o xmalloc.o |
+gl_LTLIBOBJS = argmatch.lo basename.lo dirname.lo dup-safer.lo error.lo exitfail.lo fd-safer.lo fopen-safer.lo hash.lo malloc.lo obstack.lo pipe-safer.lo quote.lo quotearg.lo stpcpy.lo strerror.lo stripslash.lo strndup.lo strnlen.lo strverscmp.lo unsetenv.lo wcwidth.lo xmalloc.lo |
+gltests_LIBOBJS = |
+gltests_LTLIBOBJS = |
+host = i386-pc-mingw32 |
+host_alias = i386-pc-mingw32 |
+host_cpu = i386 |
+host_os = mingw32 |
+host_vendor = pc |
+htmldir = ${docdir} |
+includedir = ${prefix}/include |
+infodir = ${datarootdir}/info |
+install_sh = $(SHELL) /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/install-sh |
+libdir = ${exec_prefix}/lib |
+libexecdir = ${exec_prefix}/libexec |
+localedir = ${datarootdir}/locale |
+localstatedir = ${prefix}/var |
+mandir = ${datarootdir}/man |
+mkdir_p = /usr/bin/mkdir -p |
+oldincludedir = /usr/include |
+pdfdir = ${docdir} |
+prefix = c:/progra~1/bison |
+program_transform_name = s&$$&&;s&^&&;s/i386-pc-mingw32// |
+psdir = ${docdir} |
+sbindir = ${exec_prefix}/sbin |
+sharedstatedir = ${prefix}/com |
+srcdir = ../../bison-2.4.1-src/lib |
+sysconfdir = ${prefix}/etc |
+target_alias = i386-pc-mingw32 |
+top_build_prefix = ../ |
+top_builddir = .. |
+top_srcdir = ../../bison-2.4.1-src |
+AUTOMAKE_OPTIONS = 1.5 gnits subdir-objects |
+SUBDIRS = |
+noinst_HEADERS = |
+noinst_LIBRARIES = libbison.a |
+noinst_LTLIBRARIES = |
+ |
+# This is for those projects which use "gettextize --intl" to put a source-code |
+# copy of libintl into their package. In such projects, every Makefile.am needs |
+# -I$(top_builddir)/intl, so that <libintl.h> can be found in this directory. |
+# For the Makefile.ams in other directories it is the maintainer's |
+# responsibility; for the one from gnulib we do it here. |
+# This option has no effect when the user disables NLS (because then the intl |
+# directory contains no libintl.h file) or when the project does not use |
+# "gettextize --intl". |
+#AM_CPPFLAGS += -I$(top_builddir)/intl |
+EXTRA_DIST = $(top_srcdir)/build-aux/announce-gen argmatch.c \ |
+ argmatch.h basename.c dirname.c dirname.h stripslash.c \ |
+ errno.in.h error.c error.h exitfail.c exitfail.h fopen-safer.c \ |
+ stdio--.h stdio-safer.h getopt.c getopt.in.h getopt1.c \ |
+ getopt_int.h $(top_srcdir)/build-aux/config.rpath \ |
+ $(top_srcdir)/build-aux/git-version-gen \ |
+ $(top_srcdir)/GNUmakefile hash.c hash.h \ |
+ $(top_srcdir)/build-aux/config.rpath intprops.h inttypes.in.h \ |
+ $(top_srcdir)/build-aux/javacomp.sh.in \ |
+ $(top_srcdir)/build-aux/javaexec.sh.in \ |
+ $(top_srcdir)/build-aux/link-warning.h config.charset \ |
+ ref-add.sin ref-del.sin malloc.c malloc.c obstack.c obstack.h \ |
+ quote.c quote.h quotearg.c quotearg.h stdbool.in.h stdint.in.h \ |
+ stdlib.in.h stpcpy.c streq.h strerror.c string.in.h strndup.c \ |
+ strnlen.c strtol.c strtoul.c strverscmp.c unistd.in.h \ |
+ dup-safer.c fd-safer.c pipe-safer.c unistd--.h unistd-safer.h \ |
+ unitypes.h localcharset.h uniwidth.h uniwidth/cjk.h \ |
+ unlocked-io.h unsetenv.c wchar.in.h wctype.in.h wcwidth.c \ |
+ xalloc.h xmalloc.c |
+BUILT_SOURCES = configmake.h $(ERRNO_H) $(GETOPT_H) $(INTTYPES_H) \ |
+ $(STDBOOL_H) $(STDINT_H) stdlib.h string.h unistd.h $(WCHAR_H) \ |
+ $(WCTYPE_H) |
+SUFFIXES = .sed .sin |
+MOSTLYCLEANFILES = core *.stackdump errno.h errno.h-t getopt.h \ |
+ getopt.h-t inttypes.h inttypes.h-t stdbool.h stdbool.h-t \ |
+ stdint.h stdint.h-t stdlib.h stdlib.h-t string.h string.h-t \ |
+ unistd.h unistd.h-t wchar.h wchar.h-t wctype.h wctype.h-t |
+MOSTLYCLEANDIRS = |
+CLEANFILES = configmake.h configmake.h-t charset.alias ref-add.sed \ |
+ ref-del.sed |
+DISTCLEANFILES = |
+MAINTAINERCLEANFILES = |
+AM_CPPFLAGS = |
+ |
+# Non-gnulib sources in Bison's internal library. |
+libbison_a_SOURCES = c-ctype.h c-ctype.c c-strcase.h c-strcasecmp.c \ |
+ c-strncasecmp.c gettext.h localcharset.h localcharset.c \ |
+ mbswidth.h mbswidth.c uniwidth/width.c verify.h xalloc-die.c \ |
+ xstrndup.h xstrndup.c get-errno.h get-errno.c subpipe.h \ |
+ subpipe.c $(bitsets_sources) $(additional_bitsets_sources) \ |
+ $(timevars_sources) |
+libbison_a_LIBADD = $(gl_LIBOBJS) |
+libbison_a_DEPENDENCIES = $(gl_LIBOBJS) |
+EXTRA_libbison_a_SOURCES = argmatch.c basename.c dirname.c \ |
+ stripslash.c error.c exitfail.c fopen-safer.c getopt.c \ |
+ getopt1.c hash.c malloc.c malloc.c obstack.c quote.c \ |
+ quotearg.c stpcpy.c strerror.c strndup.c strnlen.c strtol.c \ |
+ strtoul.c strverscmp.c dup-safer.c fd-safer.c pipe-safer.c \ |
+ unsetenv.c wcwidth.c xmalloc.c |
+LINK_WARNING_H = $(top_srcdir)/build-aux/link-warning.h |
+charset_alias = $(DESTDIR)$(libdir)/charset.alias |
+charset_tmp = $(DESTDIR)$(libdir)/charset.tmp |
+AM_CFLAGS = $(WARN_CFLAGS) |
+ |
+# Implementation of bitsets. |
+bitsets_sources = \ |
+ abitset.c abitset.h bbitset.h bitset.c bitset.h bitset_stats.c \ |
+ bitset_stats.h bitsetv.c bitsetv.h ebitset.c ebitset.h lbitset.c \ |
+ lbitset.h libiberty.h vbitset.c vbitset.h |
+ |
+ |
+# Additional bitset operations. |
+additional_bitsets_sources = \ |
+ bitsetv-print.h bitsetv-print.c |
+ |
+ |
+# timevars, stolen from GCC. |
+timevars_sources = \ |
+ timevar.h timevar.c timevar.def |
+ |
+ |
+# The Yacc compatibility library. |
+lib_LIBRARIES = $(YACC_LIBRARY) |
+EXTRA_LIBRARIES = liby.a |
+liby_a_SOURCES = main.c yyerror.c |
+all: $(BUILT_SOURCES) config.h |
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive |
+ |
+.SUFFIXES: |
+.SUFFIXES: .sed .sin .c .o .obj |
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/gnulib.mk $(am__configure_deps) |
+ @for dep in $?; do \ |
+ case '$(am__configure_deps)' in \ |
+ *$$dep*) \ |
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ |
+ && exit 0; \ |
+ exit 1;; \ |
+ esac; \ |
+ done; \ |
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits lib/Makefile'; \ |
+ cd $(top_srcdir) && \ |
+ $(AUTOMAKE) --gnits lib/Makefile |
+.PRECIOUS: Makefile |
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
+ @case '$?' in \ |
+ *config.status*) \ |
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
+ *) \ |
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
+ esac; |
+ |
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
+ |
+$(top_srcdir)/configure: $(am__configure_deps) |
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
+$(ACLOCAL_M4): $(am__aclocal_m4_deps) |
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
+ |
+config.h: stamp-h1 |
+ @if test ! -f $@; then \ |
+ rm -f stamp-h1; \ |
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ |
+ else :; fi |
+ |
+stamp-h1: $(srcdir)/config.hin $(top_builddir)/config.status |
+ @rm -f stamp-h1 |
+ cd $(top_builddir) && $(SHELL) ./config.status lib/config.h |
+$(srcdir)/config.hin: $(am__configure_deps) |
+ cd $(top_srcdir) && $(AUTOHEADER) |
+ rm -f stamp-h1 |
+ touch $@ |
+ |
+distclean-hdr: |
+ -rm -f config.h stamp-h1 |
+install-libLIBRARIES: $(lib_LIBRARIES) |
+ @$(NORMAL_INSTALL) |
+ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" |
+ @list='$(lib_LIBRARIES)'; for p in $$list; do \ |
+ if test -f $$p; then \ |
+ f=$(am__strip_dir) \ |
+ echo " $(libLIBRARIES_INSTALL) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ |
+ $(libLIBRARIES_INSTALL) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ |
+ else :; fi; \ |
+ done |
+ @$(POST_INSTALL) |
+ @list='$(lib_LIBRARIES)'; for p in $$list; do \ |
+ if test -f $$p; then \ |
+ p=$(am__strip_dir) \ |
+ echo " $(RANLIB) '$(DESTDIR)$(libdir)/$$p'"; \ |
+ $(RANLIB) "$(DESTDIR)$(libdir)/$$p"; \ |
+ else :; fi; \ |
+ done |
+ |
+uninstall-libLIBRARIES: |
+ @$(NORMAL_UNINSTALL) |
+ @list='$(lib_LIBRARIES)'; for p in $$list; do \ |
+ p=$(am__strip_dir) \ |
+ echo " rm -f '$(DESTDIR)$(libdir)/$$p'"; \ |
+ rm -f "$(DESTDIR)$(libdir)/$$p"; \ |
+ done |
+ |
+clean-libLIBRARIES: |
+ -test -z "$(lib_LIBRARIES)" || rm -f $(lib_LIBRARIES) |
+ |
+clean-noinstLIBRARIES: |
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) |
+uniwidth/$(am__dirstamp): |
+ @$(MKDIR_P) uniwidth |
+ @: > uniwidth/$(am__dirstamp) |
+uniwidth/$(DEPDIR)/$(am__dirstamp): |
+ @$(MKDIR_P) uniwidth/$(DEPDIR) |
+ @: > uniwidth/$(DEPDIR)/$(am__dirstamp) |
+uniwidth/width.$(OBJEXT): uniwidth/$(am__dirstamp) \ |
+ uniwidth/$(DEPDIR)/$(am__dirstamp) |
+libbison.a: $(libbison_a_OBJECTS) $(libbison_a_DEPENDENCIES) |
+ -rm -f libbison.a |
+ $(libbison_a_AR) libbison.a $(libbison_a_OBJECTS) $(libbison_a_LIBADD) |
+ $(RANLIB) libbison.a |
+liby.a: $(liby_a_OBJECTS) $(liby_a_DEPENDENCIES) |
+ -rm -f liby.a |
+ $(liby_a_AR) liby.a $(liby_a_OBJECTS) $(liby_a_LIBADD) |
+ $(RANLIB) liby.a |
+ |
+clean-noinstLTLIBRARIES: |
+ -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) |
+ @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ |
+ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ |
+ test "$$dir" != "$$p" || dir=.; \ |
+ echo "rm -f \"$${dir}/so_locations\""; \ |
+ rm -f "$${dir}/so_locations"; \ |
+ done |
+ |
+mostlyclean-compile: |
+ -rm -f *.$(OBJEXT) |
+ -rm -f uniwidth/width.$(OBJEXT) |
+ |
+distclean-compile: |
+ -rm -f *.tab.c |
+ |
+include ./$(DEPDIR)/abitset.Po |
+include ./$(DEPDIR)/argmatch.Po |
+include ./$(DEPDIR)/basename.Po |
+include ./$(DEPDIR)/bitset.Po |
+include ./$(DEPDIR)/bitset_stats.Po |
+include ./$(DEPDIR)/bitsetv-print.Po |
+include ./$(DEPDIR)/bitsetv.Po |
+include ./$(DEPDIR)/c-ctype.Po |
+include ./$(DEPDIR)/c-strcasecmp.Po |
+include ./$(DEPDIR)/c-strncasecmp.Po |
+include ./$(DEPDIR)/dirname.Po |
+include ./$(DEPDIR)/dup-safer.Po |
+include ./$(DEPDIR)/ebitset.Po |
+include ./$(DEPDIR)/error.Po |
+include ./$(DEPDIR)/exitfail.Po |
+include ./$(DEPDIR)/fd-safer.Po |
+include ./$(DEPDIR)/fopen-safer.Po |
+include ./$(DEPDIR)/get-errno.Po |
+include ./$(DEPDIR)/getopt.Po |
+include ./$(DEPDIR)/getopt1.Po |
+include ./$(DEPDIR)/hash.Po |
+include ./$(DEPDIR)/lbitset.Po |
+include ./$(DEPDIR)/localcharset.Po |
+include ./$(DEPDIR)/main.Po |
+include ./$(DEPDIR)/malloc.Po |
+include ./$(DEPDIR)/mbswidth.Po |
+include ./$(DEPDIR)/obstack.Po |
+include ./$(DEPDIR)/pipe-safer.Po |
+include ./$(DEPDIR)/quote.Po |
+include ./$(DEPDIR)/quotearg.Po |
+include ./$(DEPDIR)/stpcpy.Po |
+include ./$(DEPDIR)/strerror.Po |
+include ./$(DEPDIR)/stripslash.Po |
+include ./$(DEPDIR)/strndup.Po |
+include ./$(DEPDIR)/strnlen.Po |
+include ./$(DEPDIR)/strtol.Po |
+include ./$(DEPDIR)/strtoul.Po |
+include ./$(DEPDIR)/strverscmp.Po |
+include ./$(DEPDIR)/subpipe.Po |
+include ./$(DEPDIR)/timevar.Po |
+include ./$(DEPDIR)/unsetenv.Po |
+include ./$(DEPDIR)/vbitset.Po |
+include ./$(DEPDIR)/wcwidth.Po |
+include ./$(DEPDIR)/xalloc-die.Po |
+include ./$(DEPDIR)/xmalloc.Po |
+include ./$(DEPDIR)/xstrndup.Po |
+include ./$(DEPDIR)/yyerror.Po |
+include uniwidth/$(DEPDIR)/width.Po |
+ |
+.c.o: |
+ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ |
+ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ |
+ mv -f $$depbase.Tpo $$depbase.Po |
+# source='$<' object='$@' libtool=no \ |
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ |
+# $(COMPILE) -c -o $@ $< |
+ |
+.c.obj: |
+ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ |
+ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ |
+ mv -f $$depbase.Tpo $$depbase.Po |
+# source='$<' object='$@' libtool=no \ |
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ |
+# $(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` |
+ |
+# This directory's subdirectories are mostly independent; you can cd |
+# into them and run `make' without going through this Makefile. |
+# To change the values of `make' variables: instead of editing Makefiles, |
+# (1) if the variable is set in `config.status', edit `config.status' |
+# (which will cause the Makefiles to be regenerated when you run `make'); |
+# (2) otherwise, pass the desired values on the `make' command line. |
+$(RECURSIVE_TARGETS): |
+ @failcom='exit 1'; \ |
+ for f in x $$MAKEFLAGS; do \ |
+ case $$f in \ |
+ *=* | --[!k]*);; \ |
+ *k*) failcom='fail=yes';; \ |
+ esac; \ |
+ done; \ |
+ dot_seen=no; \ |
+ target=`echo $@ | sed s/-recursive//`; \ |
+ list='$(SUBDIRS)'; for subdir in $$list; do \ |
+ echo "Making $$target in $$subdir"; \ |
+ if test "$$subdir" = "."; then \ |
+ dot_seen=yes; \ |
+ local_target="$$target-am"; \ |
+ else \ |
+ local_target="$$target"; \ |
+ fi; \ |
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
+ || eval $$failcom; \ |
+ done; \ |
+ if test "$$dot_seen" = "no"; then \ |
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
+ fi; test -z "$$fail" |
+ |
+$(RECURSIVE_CLEAN_TARGETS): |
+ @failcom='exit 1'; \ |
+ for f in x $$MAKEFLAGS; do \ |
+ case $$f in \ |
+ *=* | --[!k]*);; \ |
+ *k*) failcom='fail=yes';; \ |
+ esac; \ |
+ done; \ |
+ dot_seen=no; \ |
+ case "$@" in \ |
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
+ *) list='$(SUBDIRS)' ;; \ |
+ esac; \ |
+ rev=''; for subdir in $$list; do \ |
+ if test "$$subdir" = "."; then :; else \ |
+ rev="$$subdir $$rev"; \ |
+ fi; \ |
+ done; \ |
+ rev="$$rev ."; \ |
+ target=`echo $@ | sed s/-recursive//`; \ |
+ for subdir in $$rev; do \ |
+ echo "Making $$target in $$subdir"; \ |
+ if test "$$subdir" = "."; then \ |
+ local_target="$$target-am"; \ |
+ else \ |
+ local_target="$$target"; \ |
+ fi; \ |
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
+ || eval $$failcom; \ |
+ done && test -z "$$fail" |
+tags-recursive: |
+ list='$(SUBDIRS)'; for subdir in $$list; do \ |
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
+ done |
+ctags-recursive: |
+ list='$(SUBDIRS)'; for subdir in $$list; do \ |
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
+ done |
+ |
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
+ unique=`for i in $$list; do \ |
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
+ done | \ |
+ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ |
+ END { if (nonempty) { for (i in files) print i; }; }'`; \ |
+ mkid -fID $$unique |
+tags: TAGS |
+ |
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \ |
+ $(TAGS_FILES) $(LISP) |
+ tags=; \ |
+ here=`pwd`; \ |
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
+ include_option=--etags-include; \ |
+ empty_fix=.; \ |
+ else \ |
+ include_option=--include; \ |
+ empty_fix=; \ |
+ fi; \ |
+ list='$(SUBDIRS)'; for subdir in $$list; do \ |
+ if test "$$subdir" = .; then :; else \ |
+ test ! -f $$subdir/TAGS || \ |
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
+ fi; \ |
+ done; \ |
+ list='$(SOURCES) $(HEADERS) config.hin $(LISP) $(TAGS_FILES)'; \ |
+ unique=`for i in $$list; do \ |
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
+ done | \ |
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
+ END { if (nonempty) { for (i in files) print i; }; }'`; \ |
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
+ test -n "$$unique" || unique=$$empty_fix; \ |
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
+ $$tags $$unique; \ |
+ fi |
+ctags: CTAGS |
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \ |
+ $(TAGS_FILES) $(LISP) |
+ tags=; \ |
+ list='$(SOURCES) $(HEADERS) config.hin $(LISP) $(TAGS_FILES)'; \ |
+ unique=`for i in $$list; do \ |
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
+ done | \ |
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
+ END { if (nonempty) { for (i in files) print i; }; }'`; \ |
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
+ $$tags $$unique |
+ |
+GTAGS: |
+ here=`$(am__cd) $(top_builddir) && pwd` \ |
+ && cd $(top_srcdir) \ |
+ && gtags -i $(GTAGS_ARGS) $$here |
+ |
+distclean-tags: |
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
+ |
+distdir: $(DISTFILES) |
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
+ list='$(DISTFILES)'; \ |
+ dist_files=`for file in $$list; do echo $$file; done | \ |
+ sed -e "s|^$$srcdirstrip/||;t" \ |
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
+ case $$dist_files in \ |
+ */*) $(MKDIR_P) `echo "$$dist_files" | \ |
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
+ sort -u` ;; \ |
+ esac; \ |
+ for file in $$dist_files; do \ |
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
+ if test -d $$d/$$file; then \ |
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
+ fi; \ |
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
+ else \ |
+ test -f $(distdir)/$$file \ |
+ || cp -p $$d/$$file $(distdir)/$$file \ |
+ || exit 1; \ |
+ fi; \ |
+ done |
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
+ if test "$$subdir" = .; then :; else \ |
+ test -d "$(distdir)/$$subdir" \ |
+ || $(MKDIR_P) "$(distdir)/$$subdir" \ |
+ || exit 1; \ |
+ distdir=`$(am__cd) $(distdir) && pwd`; \ |
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ |
+ (cd $$subdir && \ |
+ $(MAKE) $(AM_MAKEFLAGS) \ |
+ top_distdir="$$top_distdir" \ |
+ distdir="$$distdir/$$subdir" \ |
+ am__remove_distdir=: \ |
+ am__skip_length_check=: \ |
+ distdir) \ |
+ || exit 1; \ |
+ fi; \ |
+ done |
+check-am: all-am |
+check: $(BUILT_SOURCES) |
+ $(MAKE) $(AM_MAKEFLAGS) check-recursive |
+all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(HEADERS) config.h \ |
+ all-local |
+installdirs: installdirs-recursive |
+installdirs-am: |
+ for dir in "$(DESTDIR)$(libdir)"; do \ |
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
+ done |
+install: $(BUILT_SOURCES) |
+ $(MAKE) $(AM_MAKEFLAGS) install-recursive |
+install-exec: install-exec-recursive |
+install-data: install-data-recursive |
+uninstall: uninstall-recursive |
+ |
+install-am: all-am |
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
+ |
+installcheck: installcheck-recursive |
+install-strip: |
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
+ `test -z '$(STRIP)' || \ |
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
+mostlyclean-generic: |
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) |
+ |
+clean-generic: |
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
+ |
+distclean-generic: |
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
+ -rm -f uniwidth/$(DEPDIR)/$(am__dirstamp) |
+ -rm -f uniwidth/$(am__dirstamp) |
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
+ |
+maintainer-clean-generic: |
+ @echo "This command is intended for maintainers to use" |
+ @echo "it deletes files that may require special tools to rebuild." |
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) |
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) |
+clean: clean-recursive |
+ |
+clean-am: clean-generic clean-libLIBRARIES clean-noinstLIBRARIES \ |
+ clean-noinstLTLIBRARIES mostlyclean-am |
+ |
+distclean: distclean-recursive |
+ -rm -rf ./$(DEPDIR) uniwidth/$(DEPDIR) |
+ -rm -f Makefile |
+distclean-am: clean-am distclean-compile distclean-generic \ |
+ distclean-hdr distclean-local distclean-tags |
+ |
+dvi: dvi-recursive |
+ |
+dvi-am: |
+ |
+html: html-recursive |
+ |
+info: info-recursive |
+ |
+info-am: |
+ |
+install-data-am: |
+ |
+install-dvi: install-dvi-recursive |
+ |
+install-exec-am: install-exec-local install-libLIBRARIES |
+ |
+install-html: install-html-recursive |
+ |
+install-info: install-info-recursive |
+ |
+install-man: |
+ |
+install-pdf: install-pdf-recursive |
+ |
+install-ps: install-ps-recursive |
+ |
+installcheck-am: |
+ |
+maintainer-clean: maintainer-clean-recursive |
+ -rm -rf ./$(DEPDIR) uniwidth/$(DEPDIR) |
+ -rm -f Makefile |
+maintainer-clean-am: distclean-am maintainer-clean-generic |
+ |
+mostlyclean: mostlyclean-recursive |
+ |
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \ |
+ mostlyclean-local |
+ |
+pdf: pdf-recursive |
+ |
+pdf-am: |
+ |
+ps: ps-recursive |
+ |
+ps-am: |
+ |
+uninstall-am: uninstall-libLIBRARIES uninstall-local |
+ |
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ |
+ install-strip |
+ |
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
+ all all-am all-local check check-am clean clean-generic \ |
+ clean-libLIBRARIES clean-noinstLIBRARIES \ |
+ clean-noinstLTLIBRARIES ctags ctags-recursive distclean \ |
+ distclean-compile distclean-generic distclean-hdr \ |
+ distclean-local distclean-tags distdir dvi dvi-am html html-am \ |
+ info info-am install install-am install-data install-data-am \ |
+ install-dvi install-dvi-am install-exec install-exec-am \ |
+ install-exec-local install-html install-html-am install-info \ |
+ install-info-am install-libLIBRARIES install-man install-pdf \ |
+ install-pdf-am install-ps install-ps-am install-strip \ |
+ installcheck installcheck-am installdirs installdirs-am \ |
+ maintainer-clean maintainer-clean-generic mostlyclean \ |
+ mostlyclean-compile mostlyclean-generic mostlyclean-local pdf \ |
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ |
+ uninstall-libLIBRARIES uninstall-local |
+ |
+ |
+# Retrieve values of the variables through 'configure' followed by |
+# 'make', not directly through 'configure', so that a user who |
+# sets some of these variables consistently on the 'make' command |
+# line gets correct results. |
+# |
+# One advantage of this approach, compared to the classical |
+# approach of adding -DLIBDIR=\"$(libdir)\" etc. to AM_CPPFLAGS, |
+# is that it protects against the use of undefined variables. |
+# If, say, $(libdir) is not set in the Makefile, LIBDIR is not |
+# defined by this module, and code using LIBDIR gives a |
+# compilation error. |
+# |
+# Another advantage is that 'make' output is shorter. |
+# |
+# Listed in the same order as the GNU makefile conventions. |
+# The Automake-defined pkg* macros are appended, in the order |
+# listed in the Automake 1.10a+ documentation. |
+configmake.h: Makefile |
+ rm -f $@-t $@ |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ |
+ echo '#define PREFIX "$(prefix)"'; \ |
+ echo '#define EXEC_PREFIX "$(exec_prefix)"'; \ |
+ echo '#define BINDIR "$(bindir)"'; \ |
+ echo '#define SBINDIR "$(sbindir)"'; \ |
+ echo '#define LIBEXECDIR "$(libexecdir)"'; \ |
+ echo '#define DATAROOTDIR "$(datarootdir)"'; \ |
+ echo '#define DATADIR "$(datadir)"'; \ |
+ echo '#define SYSCONFDIR "$(sysconfdir)"'; \ |
+ echo '#define SHAREDSTATEDIR "$(sharedstatedir)"'; \ |
+ echo '#define LOCALSTATEDIR "$(localstatedir)"'; \ |
+ echo '#define INCLUDEDIR "$(includedir)"'; \ |
+ echo '#define OLDINCLUDEDIR "$(oldincludedir)"'; \ |
+ echo '#define DOCDIR "$(docdir)"'; \ |
+ echo '#define INFODIR "$(infodir)"'; \ |
+ echo '#define HTMLDIR "$(htmldir)"'; \ |
+ echo '#define DVIDIR "$(dvidir)"'; \ |
+ echo '#define PDFDIR "$(pdfdir)"'; \ |
+ echo '#define PSDIR "$(psdir)"'; \ |
+ echo '#define LIBDIR "$(libdir)"'; \ |
+ echo '#define LISPDIR "$(lispdir)"'; \ |
+ echo '#define LOCALEDIR "$(localedir)"'; \ |
+ echo '#define MANDIR "$(mandir)"'; \ |
+ echo '#define MANEXT "$(manext)"'; \ |
+ echo '#define PKGDATADIR "$(pkgdatadir)"'; \ |
+ echo '#define PKGINCLUDEDIR "$(pkgincludedir)"'; \ |
+ echo '#define PKGLIBDIR "$(pkglibdir)"'; \ |
+ echo '#define PKGLIBEXECDIR "$(pkglibexecdir)"'; \ |
+ } | sed '/""/d' > $@-t |
+ mv $@-t $@ |
+ |
+# We need the following in order to create <errno.h> when the system |
+# doesn't have one that is POSIX compliant. |
+errno.h: errno.in.h |
+ rm -f $@-t $@ |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ |
+ sed -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ |
+ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ |
+ -e 's|@''NEXT_ERRNO_H''@|$(NEXT_ERRNO_H)|g' \ |
+ -e 's|@''EMULTIHOP_HIDDEN''@|$(EMULTIHOP_HIDDEN)|g' \ |
+ -e 's|@''EMULTIHOP_VALUE''@|$(EMULTIHOP_VALUE)|g' \ |
+ -e 's|@''ENOLINK_HIDDEN''@|$(ENOLINK_HIDDEN)|g' \ |
+ -e 's|@''ENOLINK_VALUE''@|$(ENOLINK_VALUE)|g' \ |
+ -e 's|@''EOVERFLOW_HIDDEN''@|$(EOVERFLOW_HIDDEN)|g' \ |
+ -e 's|@''EOVERFLOW_VALUE''@|$(EOVERFLOW_VALUE)|g' \ |
+ < $(srcdir)/errno.in.h; \ |
+ } > $@-t |
+ mv $@-t $@ |
+ |
+# We need the following in order to create <getopt.h> when the system |
+# doesn't have one that works with the given compiler. |
+getopt.h: getopt.in.h |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ |
+ cat $(srcdir)/getopt.in.h; \ |
+ } > $@-t |
+ mv -f $@-t $@ |
+ |
+distclean-local: clean-GNUmakefile |
+clean-GNUmakefile: |
+ test x'$(VPATH)' != x && rm -f $(top_builddir)/GNUmakefile || : |
+ |
+# We need the following in order to create <inttypes.h> when the system |
+# doesn't have one that works with the given compiler. |
+inttypes.h: inttypes.in.h |
+ rm -f $@-t $@ |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ |
+ sed -e 's/@''HAVE_INTTYPES_H''@/$(HAVE_INTTYPES_H)/g' \ |
+ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ |
+ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ |
+ -e 's|@''NEXT_INTTYPES_H''@|$(NEXT_INTTYPES_H)|g' \ |
+ -e 's/@''PRI_MACROS_BROKEN''@/$(PRI_MACROS_BROKEN)/g' \ |
+ -e 's/@''HAVE_LONG_LONG_INT''@/$(HAVE_LONG_LONG_INT)/g' \ |
+ -e 's/@''HAVE_UNSIGNED_LONG_LONG_INT''@/$(HAVE_UNSIGNED_LONG_LONG_INT)/g' \ |
+ -e 's/@''PRIPTR_PREFIX''@/$(PRIPTR_PREFIX)/g' \ |
+ -e 's/@''GNULIB_IMAXABS''@/$(GNULIB_IMAXABS)/g' \ |
+ -e 's/@''GNULIB_IMAXDIV''@/$(GNULIB_IMAXDIV)/g' \ |
+ -e 's/@''GNULIB_STRTOIMAX''@/$(GNULIB_STRTOIMAX)/g' \ |
+ -e 's/@''GNULIB_STRTOUMAX''@/$(GNULIB_STRTOUMAX)/g' \ |
+ -e 's/@''HAVE_DECL_IMAXABS''@/$(HAVE_DECL_IMAXABS)/g' \ |
+ -e 's/@''HAVE_DECL_IMAXDIV''@/$(HAVE_DECL_IMAXDIV)/g' \ |
+ -e 's/@''HAVE_DECL_STRTOIMAX''@/$(HAVE_DECL_STRTOIMAX)/g' \ |
+ -e 's/@''HAVE_DECL_STRTOUMAX''@/$(HAVE_DECL_STRTOUMAX)/g' \ |
+ -e 's/@''INT32_MAX_LT_INTMAX_MAX''@/$(INT32_MAX_LT_INTMAX_MAX)/g' \ |
+ -e 's/@''INT64_MAX_EQ_LONG_MAX''@/$(INT64_MAX_EQ_LONG_MAX)/g' \ |
+ -e 's/@''UINT32_MAX_LT_UINTMAX_MAX''@/$(UINT32_MAX_LT_UINTMAX_MAX)/g' \ |
+ -e 's/@''UINT64_MAX_EQ_ULONG_MAX''@/$(UINT64_MAX_EQ_ULONG_MAX)/g' \ |
+ -e '/definition of GL_LINK_WARNING/r $(LINK_WARNING_H)' \ |
+ < $(srcdir)/inttypes.in.h; \ |
+ } > $@-t |
+ mv $@-t $@ |
+ |
+# We need the following in order to install a simple file in $(libdir) |
+# which is shared with other installed packages. We use a list of referencing |
+# packages so that "make uninstall" will remove the file if and only if it |
+# is not used by another installed package. |
+# On systems with glibc-2.1 or newer, the file is redundant, therefore we |
+# avoid installing it. |
+ |
+all-local: charset.alias ref-add.sed ref-del.sed |
+install-exec-local: all-local |
+ test $(GLIBC21) != no || $(mkinstalldirs) $(DESTDIR)$(libdir) |
+ if test -f $(charset_alias); then \ |
+ sed -f ref-add.sed $(charset_alias) > $(charset_tmp) ; \ |
+ $(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \ |
+ rm -f $(charset_tmp) ; \ |
+ else \ |
+ if test $(GLIBC21) = no; then \ |
+ sed -f ref-add.sed charset.alias > $(charset_tmp) ; \ |
+ $(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \ |
+ rm -f $(charset_tmp) ; \ |
+ fi ; \ |
+ fi |
+ |
+uninstall-local: all-local |
+ if test -f $(charset_alias); then \ |
+ sed -f ref-del.sed $(charset_alias) > $(charset_tmp); \ |
+ if grep '^# Packages using this file: $$' $(charset_tmp) \ |
+ > /dev/null; then \ |
+ rm -f $(charset_alias); \ |
+ else \ |
+ $(INSTALL_DATA) $(charset_tmp) $(charset_alias); \ |
+ fi; \ |
+ rm -f $(charset_tmp); \ |
+ fi |
+ |
+charset.alias: config.charset |
+ rm -f t-$@ $@ |
+ $(SHELL) $(srcdir)/config.charset '$(host)' > t-$@ |
+ mv t-$@ $@ |
+.sin.sed: |
+ rm -f t-$@ $@ |
+ sed -e '/^#/d' -e 's/@''PACKAGE''@/$(PACKAGE)/g' $< > t-$@ |
+ mv t-$@ $@ |
+ |
+# We need the following in order to create <stdbool.h> when the system |
+# doesn't have one that works. |
+stdbool.h: stdbool.in.h |
+ rm -f $@-t $@ |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ |
+ sed -e 's/@''HAVE__BOOL''@/$(HAVE__BOOL)/g' < $(srcdir)/stdbool.in.h; \ |
+ } > $@-t |
+ mv $@-t $@ |
+ |
+# We need the following in order to create <stdint.h> when the system |
+# doesn't have one that works with the given compiler. |
+stdint.h: stdint.in.h |
+ rm -f $@-t $@ |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ |
+ sed -e 's/@''HAVE_STDINT_H''@/$(HAVE_STDINT_H)/g' \ |
+ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ |
+ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ |
+ -e 's|@''NEXT_STDINT_H''@|$(NEXT_STDINT_H)|g' \ |
+ -e 's/@''HAVE_SYS_TYPES_H''@/$(HAVE_SYS_TYPES_H)/g' \ |
+ -e 's/@''HAVE_INTTYPES_H''@/$(HAVE_INTTYPES_H)/g' \ |
+ -e 's/@''HAVE_SYS_INTTYPES_H''@/$(HAVE_SYS_INTTYPES_H)/g' \ |
+ -e 's/@''HAVE_SYS_BITYPES_H''@/$(HAVE_SYS_BITYPES_H)/g' \ |
+ -e 's/@''HAVE_LONG_LONG_INT''@/$(HAVE_LONG_LONG_INT)/g' \ |
+ -e 's/@''HAVE_UNSIGNED_LONG_LONG_INT''@/$(HAVE_UNSIGNED_LONG_LONG_INT)/g' \ |
+ -e 's/@''BITSIZEOF_PTRDIFF_T''@/$(BITSIZEOF_PTRDIFF_T)/g' \ |
+ -e 's/@''PTRDIFF_T_SUFFIX''@/$(PTRDIFF_T_SUFFIX)/g' \ |
+ -e 's/@''BITSIZEOF_SIG_ATOMIC_T''@/$(BITSIZEOF_SIG_ATOMIC_T)/g' \ |
+ -e 's/@''HAVE_SIGNED_SIG_ATOMIC_T''@/$(HAVE_SIGNED_SIG_ATOMIC_T)/g' \ |
+ -e 's/@''SIG_ATOMIC_T_SUFFIX''@/$(SIG_ATOMIC_T_SUFFIX)/g' \ |
+ -e 's/@''BITSIZEOF_SIZE_T''@/$(BITSIZEOF_SIZE_T)/g' \ |
+ -e 's/@''SIZE_T_SUFFIX''@/$(SIZE_T_SUFFIX)/g' \ |
+ -e 's/@''BITSIZEOF_WCHAR_T''@/$(BITSIZEOF_WCHAR_T)/g' \ |
+ -e 's/@''HAVE_SIGNED_WCHAR_T''@/$(HAVE_SIGNED_WCHAR_T)/g' \ |
+ -e 's/@''WCHAR_T_SUFFIX''@/$(WCHAR_T_SUFFIX)/g' \ |
+ -e 's/@''BITSIZEOF_WINT_T''@/$(BITSIZEOF_WINT_T)/g' \ |
+ -e 's/@''HAVE_SIGNED_WINT_T''@/$(HAVE_SIGNED_WINT_T)/g' \ |
+ -e 's/@''WINT_T_SUFFIX''@/$(WINT_T_SUFFIX)/g' \ |
+ < $(srcdir)/stdint.in.h; \ |
+ } > $@-t |
+ mv $@-t $@ |
+ |
+# We need the following in order to create <stdlib.h> when the system |
+# doesn't have one that works with the given compiler. |
+stdlib.h: stdlib.in.h |
+ rm -f $@-t $@ |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ |
+ sed -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ |
+ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ |
+ -e 's|@''NEXT_STDLIB_H''@|$(NEXT_STDLIB_H)|g' \ |
+ -e 's|@''GNULIB_MALLOC_POSIX''@|$(GNULIB_MALLOC_POSIX)|g' \ |
+ -e 's|@''GNULIB_REALLOC_POSIX''@|$(GNULIB_REALLOC_POSIX)|g' \ |
+ -e 's|@''GNULIB_CALLOC_POSIX''@|$(GNULIB_CALLOC_POSIX)|g' \ |
+ -e 's|@''GNULIB_ATOLL''@|$(GNULIB_ATOLL)|g' \ |
+ -e 's|@''GNULIB_GETLOADAVG''@|$(GNULIB_GETLOADAVG)|g' \ |
+ -e 's|@''GNULIB_GETSUBOPT''@|$(GNULIB_GETSUBOPT)|g' \ |
+ -e 's|@''GNULIB_MKDTEMP''@|$(GNULIB_MKDTEMP)|g' \ |
+ -e 's|@''GNULIB_MKSTEMP''@|$(GNULIB_MKSTEMP)|g' \ |
+ -e 's|@''GNULIB_PUTENV''@|$(GNULIB_PUTENV)|g' \ |
+ -e 's|@''GNULIB_RANDOM_R''@|$(GNULIB_RANDOM_R)|g' \ |
+ -e 's|@''GNULIB_RPMATCH''@|$(GNULIB_RPMATCH)|g' \ |
+ -e 's|@''GNULIB_SETENV''@|$(GNULIB_SETENV)|g' \ |
+ -e 's|@''GNULIB_STRTOD''@|$(GNULIB_STRTOD)|g' \ |
+ -e 's|@''GNULIB_STRTOLL''@|$(GNULIB_STRTOLL)|g' \ |
+ -e 's|@''GNULIB_STRTOULL''@|$(GNULIB_STRTOULL)|g' \ |
+ -e 's|@''GNULIB_UNSETENV''@|$(GNULIB_UNSETENV)|g' \ |
+ -e 's|@''HAVE_ATOLL''@|$(HAVE_ATOLL)|g' \ |
+ -e 's|@''HAVE_CALLOC_POSIX''@|$(HAVE_CALLOC_POSIX)|g' \ |
+ -e 's|@''HAVE_GETSUBOPT''@|$(HAVE_GETSUBOPT)|g' \ |
+ -e 's|@''HAVE_MALLOC_POSIX''@|$(HAVE_MALLOC_POSIX)|g' \ |
+ -e 's|@''HAVE_MKDTEMP''@|$(HAVE_MKDTEMP)|g' \ |
+ -e 's|@''HAVE_REALLOC_POSIX''@|$(HAVE_REALLOC_POSIX)|g' \ |
+ -e 's|@''HAVE_RANDOM_R''@|$(HAVE_RANDOM_R)|g' \ |
+ -e 's|@''HAVE_RPMATCH''@|$(HAVE_RPMATCH)|g' \ |
+ -e 's|@''HAVE_SETENV''@|$(HAVE_SETENV)|g' \ |
+ -e 's|@''HAVE_STRTOD''@|$(HAVE_STRTOD)|g' \ |
+ -e 's|@''HAVE_STRTOLL''@|$(HAVE_STRTOLL)|g' \ |
+ -e 's|@''HAVE_STRTOULL''@|$(HAVE_STRTOULL)|g' \ |
+ -e 's|@''HAVE_STRUCT_RANDOM_DATA''@|$(HAVE_STRUCT_RANDOM_DATA)|g' \ |
+ -e 's|@''HAVE_SYS_LOADAVG_H''@|$(HAVE_SYS_LOADAVG_H)|g' \ |
+ -e 's|@''HAVE_UNSETENV''@|$(HAVE_UNSETENV)|g' \ |
+ -e 's|@''HAVE_DECL_GETLOADAVG''@|$(HAVE_DECL_GETLOADAVG)|g' \ |
+ -e 's|@''REPLACE_MKSTEMP''@|$(REPLACE_MKSTEMP)|g' \ |
+ -e 's|@''REPLACE_PUTENV''@|$(REPLACE_PUTENV)|g' \ |
+ -e 's|@''REPLACE_STRTOD''@|$(REPLACE_STRTOD)|g' \ |
+ -e 's|@''VOID_UNSETENV''@|$(VOID_UNSETENV)|g' \ |
+ -e '/definition of GL_LINK_WARNING/r $(LINK_WARNING_H)' \ |
+ < $(srcdir)/stdlib.in.h; \ |
+ } > $@-t |
+ mv $@-t $@ |
+ |
+# We need the following in order to create <string.h> when the system |
+# doesn't have one that works with the given compiler. |
+string.h: string.in.h |
+ rm -f $@-t $@ |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ |
+ sed -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ |
+ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ |
+ -e 's|@''NEXT_STRING_H''@|$(NEXT_STRING_H)|g' \ |
+ -e 's|@''GNULIB_MBSLEN''@|$(GNULIB_MBSLEN)|g' \ |
+ -e 's|@''GNULIB_MBSNLEN''@|$(GNULIB_MBSNLEN)|g' \ |
+ -e 's|@''GNULIB_MBSCHR''@|$(GNULIB_MBSCHR)|g' \ |
+ -e 's|@''GNULIB_MBSRCHR''@|$(GNULIB_MBSRCHR)|g' \ |
+ -e 's|@''GNULIB_MBSSTR''@|$(GNULIB_MBSSTR)|g' \ |
+ -e 's|@''GNULIB_MBSCASECMP''@|$(GNULIB_MBSCASECMP)|g' \ |
+ -e 's|@''GNULIB_MBSNCASECMP''@|$(GNULIB_MBSNCASECMP)|g' \ |
+ -e 's|@''GNULIB_MBSPCASECMP''@|$(GNULIB_MBSPCASECMP)|g' \ |
+ -e 's|@''GNULIB_MBSCASESTR''@|$(GNULIB_MBSCASESTR)|g' \ |
+ -e 's|@''GNULIB_MBSCSPN''@|$(GNULIB_MBSCSPN)|g' \ |
+ -e 's|@''GNULIB_MBSPBRK''@|$(GNULIB_MBSPBRK)|g' \ |
+ -e 's|@''GNULIB_MBSSPN''@|$(GNULIB_MBSSPN)|g' \ |
+ -e 's|@''GNULIB_MBSSEP''@|$(GNULIB_MBSSEP)|g' \ |
+ -e 's|@''GNULIB_MBSTOK_R''@|$(GNULIB_MBSTOK_R)|g' \ |
+ -e 's|@''GNULIB_MEMMEM''@|$(GNULIB_MEMMEM)|g' \ |
+ -e 's|@''GNULIB_MEMPCPY''@|$(GNULIB_MEMPCPY)|g' \ |
+ -e 's|@''GNULIB_MEMRCHR''@|$(GNULIB_MEMRCHR)|g' \ |
+ -e 's|@''GNULIB_RAWMEMCHR''@|$(GNULIB_RAWMEMCHR)|g' \ |
+ -e 's|@''GNULIB_STPCPY''@|$(GNULIB_STPCPY)|g' \ |
+ -e 's|@''GNULIB_STPNCPY''@|$(GNULIB_STPNCPY)|g' \ |
+ -e 's|@''GNULIB_STRCHRNUL''@|$(GNULIB_STRCHRNUL)|g' \ |
+ -e 's|@''GNULIB_STRDUP''@|$(GNULIB_STRDUP)|g' \ |
+ -e 's|@''GNULIB_STRNDUP''@|$(GNULIB_STRNDUP)|g' \ |
+ -e 's|@''GNULIB_STRNLEN''@|$(GNULIB_STRNLEN)|g' \ |
+ -e 's|@''GNULIB_STRPBRK''@|$(GNULIB_STRPBRK)|g' \ |
+ -e 's|@''GNULIB_STRSEP''@|$(GNULIB_STRSEP)|g' \ |
+ -e 's|@''GNULIB_STRSTR''@|$(GNULIB_STRSTR)|g' \ |
+ -e 's|@''GNULIB_STRCASESTR''@|$(GNULIB_STRCASESTR)|g' \ |
+ -e 's|@''GNULIB_STRTOK_R''@|$(GNULIB_STRTOK_R)|g' \ |
+ -e 's|@''GNULIB_STRERROR''@|$(GNULIB_STRERROR)|g' \ |
+ -e 's|@''GNULIB_STRSIGNAL''@|$(GNULIB_STRSIGNAL)|g' \ |
+ -e 's|@''GNULIB_STRVERSCMP''@|$(GNULIB_STRVERSCMP)|g' \ |
+ -e 's|@''HAVE_DECL_MEMMEM''@|$(HAVE_DECL_MEMMEM)|g' \ |
+ -e 's|@''HAVE_MEMPCPY''@|$(HAVE_MEMPCPY)|g' \ |
+ -e 's|@''HAVE_DECL_MEMRCHR''@|$(HAVE_DECL_MEMRCHR)|g' \ |
+ -e 's|@''HAVE_RAWMEMCHR''@|$(HAVE_RAWMEMCHR)|g' \ |
+ -e 's|@''HAVE_STPCPY''@|$(HAVE_STPCPY)|g' \ |
+ -e 's|@''HAVE_STPNCPY''@|$(HAVE_STPNCPY)|g' \ |
+ -e 's|@''HAVE_STRCHRNUL''@|$(HAVE_STRCHRNUL)|g' \ |
+ -e 's|@''HAVE_DECL_STRDUP''@|$(HAVE_DECL_STRDUP)|g' \ |
+ -e 's|@''HAVE_STRNDUP''@|$(HAVE_STRNDUP)|g' \ |
+ -e 's|@''HAVE_DECL_STRNDUP''@|$(HAVE_DECL_STRNDUP)|g' \ |
+ -e 's|@''HAVE_DECL_STRNLEN''@|$(HAVE_DECL_STRNLEN)|g' \ |
+ -e 's|@''HAVE_STRPBRK''@|$(HAVE_STRPBRK)|g' \ |
+ -e 's|@''HAVE_STRSEP''@|$(HAVE_STRSEP)|g' \ |
+ -e 's|@''HAVE_STRCASESTR''@|$(HAVE_STRCASESTR)|g' \ |
+ -e 's|@''HAVE_DECL_STRTOK_R''@|$(HAVE_DECL_STRTOK_R)|g' \ |
+ -e 's|@''HAVE_DECL_STRERROR''@|$(HAVE_DECL_STRERROR)|g' \ |
+ -e 's|@''HAVE_DECL_STRSIGNAL''@|$(HAVE_DECL_STRSIGNAL)|g' \ |
+ -e 's|@''HAVE_STRVERSCMP''@|$(HAVE_STRVERSCMP)|g' \ |
+ -e 's|@''REPLACE_MEMMEM''@|$(REPLACE_MEMMEM)|g' \ |
+ -e 's|@''REPLACE_STRCASESTR''@|$(REPLACE_STRCASESTR)|g' \ |
+ -e 's|@''REPLACE_STRDUP''@|$(REPLACE_STRDUP)|g' \ |
+ -e 's|@''REPLACE_STRSTR''@|$(REPLACE_STRSTR)|g' \ |
+ -e 's|@''REPLACE_STRERROR''@|$(REPLACE_STRERROR)|g' \ |
+ -e 's|@''REPLACE_STRSIGNAL''@|$(REPLACE_STRSIGNAL)|g' \ |
+ -e '/definition of GL_LINK_WARNING/r $(LINK_WARNING_H)' \ |
+ < $(srcdir)/string.in.h; \ |
+ } > $@-t |
+ mv $@-t $@ |
+ |
+# We need the following in order to create an empty placeholder for |
+# <unistd.h> when the system doesn't have one. |
+unistd.h: unistd.in.h |
+ rm -f $@-t $@ |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ |
+ sed -e 's|@''HAVE_UNISTD_H''@|$(HAVE_UNISTD_H)|g' \ |
+ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ |
+ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ |
+ -e 's|@''NEXT_UNISTD_H''@|$(NEXT_UNISTD_H)|g' \ |
+ -e 's|@''GNULIB_CHOWN''@|$(GNULIB_CHOWN)|g' \ |
+ -e 's|@''GNULIB_CLOSE''@|$(GNULIB_CLOSE)|g' \ |
+ -e 's|@''GNULIB_DUP2''@|$(GNULIB_DUP2)|g' \ |
+ -e 's|@''GNULIB_ENVIRON''@|$(GNULIB_ENVIRON)|g' \ |
+ -e 's|@''GNULIB_EUIDACCESS''@|$(GNULIB_EUIDACCESS)|g' \ |
+ -e 's|@''GNULIB_FCHDIR''@|$(GNULIB_FCHDIR)|g' \ |
+ -e 's|@''GNULIB_FSYNC''@|$(GNULIB_FSYNC)|g' \ |
+ -e 's|@''GNULIB_FTRUNCATE''@|$(GNULIB_FTRUNCATE)|g' \ |
+ -e 's|@''GNULIB_GETCWD''@|$(GNULIB_GETCWD)|g' \ |
+ -e 's|@''GNULIB_GETDOMAINNAME''@|$(GNULIB_GETDOMAINNAME)|g' \ |
+ -e 's|@''GNULIB_GETDTABLESIZE''@|$(GNULIB_GETDTABLESIZE)|g' \ |
+ -e 's|@''GNULIB_GETHOSTNAME''@|$(GNULIB_GETHOSTNAME)|g' \ |
+ -e 's|@''GNULIB_GETLOGIN_R''@|$(GNULIB_GETLOGIN_R)|g' \ |
+ -e 's|@''GNULIB_GETPAGESIZE''@|$(GNULIB_GETPAGESIZE)|g' \ |
+ -e 's|@''GNULIB_GETUSERSHELL''@|$(GNULIB_GETUSERSHELL)|g' \ |
+ -e 's|@''GNULIB_LCHOWN''@|$(GNULIB_LCHOWN)|g' \ |
+ -e 's|@''GNULIB_LSEEK''@|$(GNULIB_LSEEK)|g' \ |
+ -e 's|@''GNULIB_READLINK''@|$(GNULIB_READLINK)|g' \ |
+ -e 's|@''GNULIB_SLEEP''@|$(GNULIB_SLEEP)|g' \ |
+ -e 's|@''GNULIB_UNISTD_H_SIGPIPE''@|$(GNULIB_UNISTD_H_SIGPIPE)|g' \ |
+ -e 's|@''GNULIB_WRITE''@|$(GNULIB_WRITE)|g' \ |
+ -e 's|@''HAVE_DUP2''@|$(HAVE_DUP2)|g' \ |
+ -e 's|@''HAVE_EUIDACCESS''@|$(HAVE_EUIDACCESS)|g' \ |
+ -e 's|@''HAVE_FSYNC''@|$(HAVE_FSYNC)|g' \ |
+ -e 's|@''HAVE_FTRUNCATE''@|$(HAVE_FTRUNCATE)|g' \ |
+ -e 's|@''HAVE_GETDOMAINNAME''@|$(HAVE_GETDOMAINNAME)|g' \ |
+ -e 's|@''HAVE_GETDTABLESIZE''@|$(HAVE_GETDTABLESIZE)|g' \ |
+ -e 's|@''HAVE_GETHOSTNAME''@|$(HAVE_GETHOSTNAME)|g' \ |
+ -e 's|@''HAVE_GETPAGESIZE''@|$(HAVE_GETPAGESIZE)|g' \ |
+ -e 's|@''HAVE_GETUSERSHELL''@|$(HAVE_GETUSERSHELL)|g' \ |
+ -e 's|@''HAVE_READLINK''@|$(HAVE_READLINK)|g' \ |
+ -e 's|@''HAVE_SLEEP''@|$(HAVE_SLEEP)|g' \ |
+ -e 's|@''HAVE_DECL_ENVIRON''@|$(HAVE_DECL_ENVIRON)|g' \ |
+ -e 's|@''HAVE_DECL_GETLOGIN_R''@|$(HAVE_DECL_GETLOGIN_R)|g' \ |
+ -e 's|@''HAVE_OS_H''@|$(HAVE_OS_H)|g' \ |
+ -e 's|@''HAVE_SYS_PARAM_H''@|$(HAVE_SYS_PARAM_H)|g' \ |
+ -e 's|@''REPLACE_CHOWN''@|$(REPLACE_CHOWN)|g' \ |
+ -e 's|@''REPLACE_CLOSE''@|$(REPLACE_CLOSE)|g' \ |
+ -e 's|@''REPLACE_FCHDIR''@|$(REPLACE_FCHDIR)|g' \ |
+ -e 's|@''REPLACE_GETCWD''@|$(REPLACE_GETCWD)|g' \ |
+ -e 's|@''REPLACE_GETPAGESIZE''@|$(REPLACE_GETPAGESIZE)|g' \ |
+ -e 's|@''REPLACE_LCHOWN''@|$(REPLACE_LCHOWN)|g' \ |
+ -e 's|@''REPLACE_LSEEK''@|$(REPLACE_LSEEK)|g' \ |
+ -e 's|@''REPLACE_WRITE''@|$(REPLACE_WRITE)|g' \ |
+ -e 's|@''UNISTD_H_HAVE_WINSOCK2_H''@|$(UNISTD_H_HAVE_WINSOCK2_H)|g' \ |
+ -e '/definition of GL_LINK_WARNING/r $(LINK_WARNING_H)' \ |
+ < $(srcdir)/unistd.in.h; \ |
+ } > $@-t |
+ mv $@-t $@ |
+ |
+# We need the following in order to create <wchar.h> when the system |
+# version does not work standalone. |
+wchar.h: wchar.in.h |
+ rm -f $@-t $@ |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ |
+ sed -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ |
+ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ |
+ -e 's|@''NEXT_WCHAR_H''@|$(NEXT_WCHAR_H)|g' \ |
+ -e 's/@''HAVE_WCHAR_H''@/$(HAVE_WCHAR_H)/g' \ |
+ -e 's|@''GNULIB_WCWIDTH''@|$(GNULIB_WCWIDTH)|g' \ |
+ -e 's/@''HAVE_WINT_T''@/$(HAVE_WINT_T)/g' \ |
+ -e 's|@''HAVE_DECL_WCWIDTH''@|$(HAVE_DECL_WCWIDTH)|g' \ |
+ -e 's|@''REPLACE_WCWIDTH''@|$(REPLACE_WCWIDTH)|g' \ |
+ -e '/definition of GL_LINK_WARNING/r $(LINK_WARNING_H)' \ |
+ < $(srcdir)/wchar.in.h; \ |
+ } > $@-t |
+ mv $@-t $@ |
+ |
+# We need the following in order to create <wctype.h> when the system |
+# doesn't have one that works with the given compiler. |
+wctype.h: wctype.in.h |
+ rm -f $@-t $@ |
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ |
+ sed -e 's/@''HAVE_WCTYPE_H''@/$(HAVE_WCTYPE_H)/g' \ |
+ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ |
+ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ |
+ -e 's|@''NEXT_WCTYPE_H''@|$(NEXT_WCTYPE_H)|g' \ |
+ -e 's/@''HAVE_ISWCNTRL''@/$(HAVE_ISWCNTRL)/g' \ |
+ -e 's/@''HAVE_WINT_T''@/$(HAVE_WINT_T)/g' \ |
+ -e 's/@''REPLACE_ISWCNTRL''@/$(REPLACE_ISWCNTRL)/g' \ |
+ < $(srcdir)/wctype.in.h; \ |
+ } > $@-t |
+ mv $@-t $@ |
+ |
+mostlyclean-local: mostlyclean-generic |
+ @for dir in '' $(MOSTLYCLEANDIRS); do \ |
+ if test -n "$$dir" && test -d $$dir; then \ |
+ echo "rmdir $$dir"; rmdir $$dir; \ |
+ fi; \ |
+ done; \ |
+ : |
+# Tell versions [3.59,3.63) of GNU make to not export all variables. |
+# Otherwise a system limit (for SysV at least) may be exceeded. |
+.NOEXPORT: |
Property changes on: bison\src\bison\2.4.1\bison-2.4.1\lib\Makefile |
___________________________________________________________________ |
Added: svn:eol-style |
+ LF |