Add native Windows binary for bison.

bison/src/bison/2.4.1/bison-2.4.1-src/djgpp/config.sed

Index: bison/src/bison/2.4.1/bison-2.4.1-src/djgpp/config.sed
===================================================================
--- bison/src/bison/2.4.1/bison-2.4.1-src/djgpp/config.sed	(revision 0)
+++ bison/src/bison/2.4.1/bison-2.4.1-src/djgpp/config.sed	(revision 0)
@@ -0,0 +1,191 @@
+# DJGPP specific configuration file.
+# Sed script for additional DJGPP specific editing
+# of the configure script generated by autoconf 2.62.
+
+
+# Copyright (C) 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# Additional editing of Makefiles
+/^eval sed.*ac_file_inputs.*tmp\/out \\$/ {
+:loop
+n
+/^$/!b loop
+a\
+cat > "$tmp/subs-djgpp.sed" << eof_djgpp\
+# DJGPP specific Makefile changes.\
+s,\\.deps,_deps,g\
+s,\\.libs,_libs,g\
+s,\\.new\\.,_new.,g\
+s,\\.old\\.,_old.,g\
+s,\\.tab\\.,_tab.,g\
+s,c++\\.at,cxx.at,g\
+s,c++\\.m4,cxx.m4,g\
+s,c++-skel\\.m4,cxx-skel.m4,g\
+s,calc++,calcxx,g\
+s,scan-gram-c,c-scan-gram,g\
+s,scan-skel-c,c-scan-skel,g\
+s,inttypes_,_inttypes,g\
+s,javacomp\\.sh\\.in,javacomp.sh-in,g\
+s,javaexec\\.sh\\.in,javaexec.sh-in,g\
+s,yacc\\.1\\.in,yacc.1-in,g\
+s,bench\\.pl\\.in,bench.pl-in,g\
+s,Makefile\\.am\\.in,Makefile.am-in,g\
+s,Makefile\\.in\\.in,Makefile.in-in,g\
+/^\\.y\\.c:/,/^$/ {\
+  /\\\$(YACCCOMPILE)/ {\
+    a\\\\\
+	-@test -f y.tab.c && mv -f y.tab.c y_tab.c\\\\\
+	-@test -f y.tab.h && mv -f y.tab.h y_tab.h\
+  }\
+}\
+/^libbison.a:/ i\\\\\
+\\$(top_srcdir)/djgpp/subpipe.c: \\$(top_srcdir)/djgpp/subpipe.h\\\\\
+subpipe.o: \\$(top_srcdir)/djgpp/subpipe.c \\$(top_srcdir)/djgpp/subpipe.h\\\\\
+	\\$(COMPILE) -c \\$<\
+/^yacc:/ i\\\\\
+yacc.bat:\\\\\
+	echo "bison\\$(EXEEXT) -y %1 %2 %3 %4 %5 %6 %7 %8 %9" >\\$@\
+/^bin_SCRIPTS =/s/$/ yacc.bat/\
+/^MOSTLYCLEANFILES = yacc/s/$/ yacc.bat/\
+/cross-options.texi:/,/^$/ s|bison|&.exe|g\
+/^\\.x\\.1:/,/^$/ s|\\$program|&.exe|g\
+eof_djgpp\
+sed -f "\$tmp/subs-djgpp.sed" \$tmp/out > \$tmp/out.djgpp\
+mv -f \$tmp/out.djgpp \$tmp/out
+}
+
+# Makefile.in.in is renamed to Makefile.in-in.
+/ac_config_files=/ {
+  /runtime-po/!s|po/Makefile\.in|&:po/Makefile.in-in|
+  s|runtime-po/Makefile\.in|&:runtime-po/Makefile.in-in|
+  s|javacomp\.sh\.in|javacomp.sh-in|
+  s|javaexec\.sh\.in|javaexec.sh-in|
+  s|doc/yacc\.1|&:doc/yacc.1-in|
+  s|etc/bench.pl|&:etc/bench.pl-in|
+}
+
+/CONFIG_FILES=/ {
+  /runtime-po/!s|po/Makefile\.in|&:po/Makefile.in-in|2
+  s|runtime-po/Makefile\.in|&:runtime-po/Makefile.in-in|2
+  s|javacomp\.sh\.in|javacomp.sh-in|
+  s|javaexec\.sh\.in|javaexec.sh-in|
+  s|doc/yacc\.1|&:doc/yacc.1-in|2
+  s|etc/bench\.pl|&:etc/bench.pl-in|2
+}
+
+# We always use _deps and _libs instead of .deps and .libs, because
+# the latter is an invalid name on 8+3 MS-DOS file system.  This makes
+# the generated Makefiles good for every DJGPP installation, not only
+# the one where the package was configured (which could happen to be
+# a Windows box, where leading dots in file names are allowed).
+/^rmdir[	 ]*\.tst/ i\
+am__leading_dot=_
+
+# Replace (command) > /dev/null with `command > /dev/null`, since
+# parenthesized commands always return zero status in the ported Bash,
+# even if the named command doesn't exist
+/if ([^|;`]*null/{
+  s,(,`,
+  s,),,
+  /null[	 ]*2>&1/ s,2>&1,&`,
+  /null.*null/ s,null.*null,&`,
+  /null.*null/ !{
+    /null[	 ]*2>&1/ !s,null,&`,
+  }
+}
+
+# DOS-style absolute file names should be supported as well
+/\*) top_srcdir=/s,/\*,[\\\\/]* | ?:[\\\\/]*,
+
+# The following two items are changes needed for configuring
+# and compiling across partitions.
+# 1) The given srcdir value is always translated from the
+#    "x:" syntax into "/dev/x" syntax while we run configure.
+/^[	 ]*-srcdir=\*.*$/ a\
+    ac_optarg=`echo "$ac_optarg" | sed "s,^\\([A-Za-z]\\):,/dev/\\1,"`
+/set X `ls -Lt \$srcdir/ i\
+   if `echo $srcdir | grep "^/dev/" - > /dev/null`; then\
+     srcdir=`echo "$srcdir" | sed -e "s%^/dev/%%" -e "s%/%:/%"`\
+   fi
+
+# Autoconf 2.52e generated configure scripts
+# write absolute paths into Makefiles and bison.in
+# making them useless for DJGPP installations for
+# which the package has not been configured for.
+/MISSING=/,/^$/ {
+  /^fi$/ a\
+am_missing_run=`echo "$am_missing_run" | sed 's%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%'`
+}
+/^install_sh=/a\
+install_sh=`echo "$install_sh" | sed 's%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%'`
+
+# This will only work if the assumption that the
+# testsuite is ran from the following path:
+#   ${top_srcdir}/tests/testsuite.dir
+# holds. The explicit names are of no importance.
+#   ../../. == ${top_srcdir}
+#/^esac$/,/^ac_abs_srcdir=/ {
+/^ac_abs_srcdir=/ i\
+ac_abs_builddir=`echo "$ac_abs_builddir" | sed "s%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%"`\
+ac_abs_top_builddir=`echo "$ac_abs_top_builddir" | sed "s%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%"`\
+ac_abs_top_srcdir=`echo "$ac_abs_top_srcdir" | sed "s%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%"`
+#ac_abs_srcdir=`echo "$ac_abs_srcdir" | sed "s%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%"`
+/^ac_abs_srcdir=/ a\
+for dj_dir in $ac_abs_builddir $ac_abs_top_builddir $ac_abs_top_srcdir $ac_abs_srcdir\
+do\
+  ac_abs_builddir=`echo "$ac_abs_builddir" | sed "s%//%/%g"`\
+  ac_abs_top_builddir=`echo "$ac_abs_top_builddir" | sed "s%//%/%g"`\
+  ac_abs_top_srcdir=`echo "$ac_abs_top_srcdir" | sed "s%//%/%g"`\
+  ac_abs_srcdir=`echo "$ac_abs_srcdir" | sed "s%//%/%g"`\
+done
+
+# Add DJGPP version information.
+/^#define VERSION/ s/\$VERSION/&  (DJGPP port (r1))/
+
+# We need makeinfo to make the html formated docs.
+/\$am_missing_run[	 ]*makeinfo/ s,\$am_missing_run,,
+
+# The path to the FORTRAN compiler and libraries
+# shall contain no absolute path reference so it
+# will be good for all djgpp installations.
+/^FLIBS="\$ac_cv_flibs"/ i\
+ac_djgpp_path=`echo "$DJDIR" | sed 's%\\\\\\%/%g' | tr $as_cr_LETTERS $as_cr_letters`\
+ac_cv_flibs=`echo "$ac_cv_flibs" | sed "s%-L$ac_djgpp_path%-L/dev/env/DJDIR%g"`
+
+# Autoconf generated configure scripts write absolute
+# paths of certain header files into Makefiles making
+# them useless for DJGPP installations for which the
+# package has not been configured for.
+/^.*echo "\$as_me:\$LINENO: result: \$gl_cv_absolute_.*$/ {
+h
+s,^.*\(gl_cv_absolute_\)\([a-z0-9_]*\)\(_h\).*$,\1\2\3=`echo $\1\2\3 | sed "s%[^:]:.*/include/%/dev/env/DJDIR/include/%"`,
+G
+}
+/^.*echo "\$as_me:\$LINENO: result: \$gl_cv_full_.*$/ {
+h
+s,^.*\(gl_cv_full_\)\([a-z0-9_]*\)\(_h\).*$,\1\2\3=`echo $\1\2\3 | sed "s%[^:]:.*/include/%/dev/env/DJDIR/include/%"`,
+G
+}
+
+# The following is not a valid DOS file name
+s/calc++/calcxx/g
+
+# The CR test for awk does not work for DJGPP.
+/^ac_cs_awk_cr=/,/^$/ {
+  /^fi$/ a\
+ac_cs_awk_cr=$ac_cr
+}