Add native Windows binary for bison.

bison/src/bison/2.4.1/bison-2.4.1/Makefile

Index: bison/src/bison/2.4.1/bison-2.4.1/Makefile
===================================================================
--- bison/src/bison/2.4.1/bison-2.4.1/Makefile	(revision 0)
+++ bison/src/bison/2.4.1/bison-2.4.1/Makefile	(revision 0)
@@ -0,0 +1,1000 @@
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+VPATH = ../bison-2.4.1-src
+pkgdatadir = $(datadir)/bison
+pkglibdir = $(libdir)/bison
+pkgincludedir = $(includedir)/bison
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = i386-pc-mingw32
+host_triplet = i386-pc-mingw32
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(top_srcdir)/build-aux/javacomp.sh.in \
+	$(top_srcdir)/build-aux/javaexec.sh.in $(top_srcdir)/configure \
+	ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README-alpha \
+	THANKS TODO
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/argmatch.m4 \
+	$(top_srcdir)/m4/bison-i18n.m4 $(top_srcdir)/m4/c-working.m4 \
+	$(top_srcdir)/m4/config-h.m4 $(top_srcdir)/m4/cxx.m4 \
+	$(top_srcdir)/m4/dirname.m4 $(top_srcdir)/m4/dmalloc.m4 \
+	$(top_srcdir)/m4/dos.m4 $(top_srcdir)/m4/double-slash-root.m4 \
+	$(top_srcdir)/m4/environ.m4 $(top_srcdir)/m4/errno_h.m4 \
+	$(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exitfail.m4 \
+	$(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/getopt.m4 \
+	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gnulib-common.m4 \
+	$(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/hash.m4 \
+	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/include_next.m4 \
+	$(top_srcdir)/m4/inline.m4 $(top_srcdir)/m4/intlmacosx.m4 \
+	$(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \
+	$(top_srcdir)/m4/javacomp.m4 $(top_srcdir)/m4/javaexec.m4 \
+	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+	$(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/longlong.m4 \
+	$(top_srcdir)/m4/m4.m4 $(top_srcdir)/m4/malloc.m4 \
+	$(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbstate_t.m4 \
+	$(top_srcdir)/m4/mbswidth.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/m4/quote.m4 $(top_srcdir)/m4/quotearg.m4 \
+	$(top_srcdir)/m4/setenv.m4 $(top_srcdir)/m4/stdbool.m4 \
+	$(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdio-safer.m4 \
+	$(top_srcdir)/m4/stdlib_h.m4 $(top_srcdir)/m4/stpcpy.m4 \
+	$(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
+	$(top_srcdir)/m4/strndup.m4 $(top_srcdir)/m4/strnlen.m4 \
+	$(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/strtoul.m4 \
+	$(top_srcdir)/m4/strverscmp.m4 $(top_srcdir)/m4/subpipe.m4 \
+	$(top_srcdir)/m4/timevar.m4 $(top_srcdir)/m4/unistd-safer.m4 \
+	$(top_srcdir)/m4/unistd_h.m4 $(top_srcdir)/m4/unlocked-io.m4 \
+	$(top_srcdir)/m4/warnings.m4 $(top_srcdir)/m4/wchar.m4 \
+	$(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype.m4 \
+	$(top_srcdir)/m4/wcwidth.m4 $(top_srcdir)/m4/wint_t.m4 \
+	$(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/xstrndup.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/lib/config.h
+CONFIG_CLEAN_FILES = javacomp.sh javaexec.sh
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(aclocaldir)"
+aclocalDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(aclocal_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run aclocal-1.10
+AMTAR = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run tar
+AUTOCONF = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run autoconf
+AUTOHEADER = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run autoheader
+AUTOM4TE = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run autom4te
+AUTOMAKE = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run automake-1.10
+AWK = gawk
+BISON_CXX_WORKS = :
+BISON_LOCALEDIR = /usr/share/locale
+BITSIZEOF_PTRDIFF_T = 
+BITSIZEOF_SIG_ATOMIC_T = 
+BITSIZEOF_SIZE_T = 
+BITSIZEOF_WCHAR_T = 
+BITSIZEOF_WINT_T = 
+CC = gcc -std=gnu99
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wpointer-arith -O3 -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math  -Wstrict-prototypes  
+CLASSPATH = D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\dbexamples.jar;D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\db.jar;D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\debug\dbexamples.jar;D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\debug\db.jar
+CLASSPATH_SEPARATOR = ;
+CONF_JAVA = gij
+CONF_JAVAC = 
+CPP = gcc -std=gnu99 -E
+CPPFLAGS =   -D__USE_MINGW_ACCESS -D_LARGEFILE_SOURCE=1 -D_LARGEFILE64_SOURCE=1 -D_FILE_OFFSET_BITS=64 -DENABLE_RELOCATABLE -DINSTALLPREFIX=\"$(prefix)\" -DINSTALLDIR=\"$(bindir)\" -DEXEEXT=\"$(EXEEXT)\" -DNO_XMALLOC       -ID:/Progra~1/GnuWin32/include     
+CXX = g++
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wpointer-arith -O3 -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math  -fconserve-space -fno-rtti -D__STDC_LIMIT_MACROS  
+CYGPATH_W = cygpath -w
+DEFS = 
+DEPDIR = .deps
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /usr/bin/grep -E
+EMULTIHOP_HIDDEN = 0
+EMULTIHOP_VALUE = 
+ENOLINK_HIDDEN = 0
+ENOLINK_VALUE = 
+EOVERFLOW_HIDDEN = 0
+EOVERFLOW_VALUE = 
+ERRNO_H = errno.h
+EXEEXT = .exe
+GCC = yes
+GETOPT_H = 
+GETTEXT_MACRO_VERSION = 0.17
+GLIBC21 = no
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GNULIB_ATOLL = 0
+GNULIB_CALLOC_POSIX = 0
+GNULIB_CHOWN = 0
+GNULIB_CLOSE = 0
+GNULIB_DUP2 = 0
+GNULIB_ENVIRON = 1
+GNULIB_EUIDACCESS = 0
+GNULIB_FCHDIR = 0
+GNULIB_FSYNC = 0
+GNULIB_FTRUNCATE = 0
+GNULIB_GETCWD = 0
+GNULIB_GETDOMAINNAME = 0
+GNULIB_GETDTABLESIZE = 0
+GNULIB_GETHOSTNAME = 0
+GNULIB_GETLOADAVG = 0
+GNULIB_GETLOGIN_R = 0
+GNULIB_GETPAGESIZE = 0
+GNULIB_GETSUBOPT = 0
+GNULIB_GETUSERSHELL = 0
+GNULIB_IMAXABS = 0
+GNULIB_IMAXDIV = 0
+GNULIB_LCHOWN = 0
+GNULIB_LSEEK = 0
+GNULIB_MALLOC_POSIX = 1
+GNULIB_MBSCASECMP = 0
+GNULIB_MBSCASESTR = 0
+GNULIB_MBSCHR = 0
+GNULIB_MBSCSPN = 0
+GNULIB_MBSLEN = 0
+GNULIB_MBSNCASECMP = 0
+GNULIB_MBSNLEN = 0
+GNULIB_MBSPBRK = 0
+GNULIB_MBSPCASECMP = 0
+GNULIB_MBSRCHR = 0
+GNULIB_MBSSEP = 0
+GNULIB_MBSSPN = 0
+GNULIB_MBSSTR = 0
+GNULIB_MBSTOK_R = 0
+GNULIB_MEMMEM = 0
+GNULIB_MEMPCPY = 0
+GNULIB_MEMRCHR = 0
+GNULIB_MKDTEMP = 0
+GNULIB_MKSTEMP = 0
+GNULIB_PUTENV = 0
+GNULIB_RANDOM_R = 0
+GNULIB_RAWMEMCHR = 0
+GNULIB_READLINK = 0
+GNULIB_REALLOC_POSIX = 0
+GNULIB_RPMATCH = 0
+GNULIB_SETENV = 0
+GNULIB_SLEEP = 0
+GNULIB_STPCPY = 1
+GNULIB_STPNCPY = 0
+GNULIB_STRCASESTR = 0
+GNULIB_STRCHRNUL = 0
+GNULIB_STRDUP = 0
+GNULIB_STRERROR = 1
+GNULIB_STRNDUP = 1
+GNULIB_STRNLEN = 1
+GNULIB_STRPBRK = 0
+GNULIB_STRSEP = 0
+GNULIB_STRSIGNAL = 0
+GNULIB_STRSTR = 0
+GNULIB_STRTOD = 0
+GNULIB_STRTOIMAX = 0
+GNULIB_STRTOK_R = 0
+GNULIB_STRTOLL = 0
+GNULIB_STRTOULL = 0
+GNULIB_STRTOUMAX = 0
+GNULIB_STRVERSCMP = 1
+GNULIB_UNISTD_H_SIGPIPE = 0
+GNULIB_UNSETENV = 1
+GNULIB_WCWIDTH = 1
+GNULIB_WRITE = 0
+GREP = /usr/bin/grep
+HAVE_ATOLL = 1
+HAVE_CALLOC_POSIX = 1
+HAVE_DECL_ENVIRON = 0
+HAVE_DECL_GETLOADAVG = 1
+HAVE_DECL_GETLOGIN_R = 1
+HAVE_DECL_IMAXABS = 1
+HAVE_DECL_IMAXDIV = 1
+HAVE_DECL_MEMMEM = 1
+HAVE_DECL_MEMRCHR = 1
+HAVE_DECL_STRDUP = 1
+HAVE_DECL_STRERROR = 1
+HAVE_DECL_STRNDUP = 0
+HAVE_DECL_STRNLEN = 0
+HAVE_DECL_STRSIGNAL = 1
+HAVE_DECL_STRTOIMAX = 1
+HAVE_DECL_STRTOK_R = 1
+HAVE_DECL_STRTOUMAX = 1
+HAVE_DECL_WCWIDTH = 0
+HAVE_DUP2 = 1
+HAVE_EUIDACCESS = 1
+HAVE_FSYNC = 1
+HAVE_FTRUNCATE = 1
+HAVE_GCJ_C = 
+HAVE_GCJ_IN_PATH = yes
+HAVE_GETDOMAINNAME = 1
+HAVE_GETDTABLESIZE = 1
+HAVE_GETHOSTNAME = 1
+HAVE_GETPAGESIZE = 1
+HAVE_GETSUBOPT = 1
+HAVE_GETUSERSHELL = 1
+HAVE_GIJ = 1
+HAVE_GIJ_IN_PATH = yes
+HAVE_INTTYPES_H = 1
+HAVE_ISWCNTRL = 1
+HAVE_JAVA = 
+HAVE_JAVAC = 
+HAVE_JAVAC_ENVVAR = 
+HAVE_JAVAC_IN_PATH = 
+HAVE_JAVA_ENVVAR = 
+HAVE_JAVA_IN_PATH = yes
+HAVE_JIKES = 
+HAVE_JIKES_IN_PATH = 
+HAVE_JRE = 
+HAVE_JRE_IN_PATH = 
+HAVE_JVIEW = 
+HAVE_JVIEW_IN_PATH = yes
+HAVE_LONG_LONG_INT = 1
+HAVE_MALLOC_POSIX = 0
+HAVE_MEMPCPY = 1
+HAVE_MKDTEMP = 1
+HAVE_OS_H = 0
+HAVE_RANDOM_R = 1
+HAVE_RAWMEMCHR = 1
+HAVE_READLINK = 1
+HAVE_REALLOC_POSIX = 1
+HAVE_RPMATCH = 1
+HAVE_SETENV = 1
+HAVE_SIGNED_SIG_ATOMIC_T = 
+HAVE_SIGNED_WCHAR_T = 
+HAVE_SIGNED_WINT_T = 
+HAVE_SLEEP = 1
+HAVE_STDINT_H = 1
+HAVE_STPCPY = 0
+HAVE_STPNCPY = 1
+HAVE_STRCASESTR = 1
+HAVE_STRCHRNUL = 1
+HAVE_STRNDUP = 0
+HAVE_STRPBRK = 1
+HAVE_STRSEP = 1
+HAVE_STRTOD = 1
+HAVE_STRTOLL = 1
+HAVE_STRTOULL = 1
+HAVE_STRUCT_RANDOM_DATA = 0
+HAVE_STRVERSCMP = 0
+HAVE_SYS_BITYPES_H = 
+HAVE_SYS_INTTYPES_H = 
+HAVE_SYS_LOADAVG_H = 0
+HAVE_SYS_PARAM_H = 0
+HAVE_SYS_TYPES_H = 1
+HAVE_UNISTD_H = 1
+HAVE_UNSETENV = 0
+HAVE_UNSIGNED_LONG_LONG_INT = 1
+HAVE_WCHAR_H = 1
+HAVE_WCTYPE_H = 1
+HAVE_WINT_T = 1
+HAVE__BOOL = 1
+HELP2MAN = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run help2man
+INCLUDE_NEXT = include_next
+INCLUDE_NEXT_AS_FIRST_DIRECTIVE = include_next
+INSTALL = /bin/install.exe -cp
+INSTALL_DATA = /bin/install.exe -cp
+INSTALL_PROGRAM = /bin/install.exe -cp
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INT32_MAX_LT_INTMAX_MAX = 1
+INT64_MAX_EQ_LONG_MAX = 0
+INTLLIBS = D:/Progra~1/GnuWin32/lib/libintl.dll.a -LD:/Progra~1/GnuWin32/lib
+INTL_MACOSX_LIBS = 
+INTTYPES_H = inttypes.h
+LDFLAGS =  -Wl,-s -Wl,--force-exe-suffix -Wl,--enable-auto-import -Wl,--enable-runtime-pseudo-reloc -Wl,--allow-multiple-definition -Wl,--enable-stdcall-fixup -LD:/Progra~1/GnuWin32/lib   
+LEX = flex
+LEXLIB = 
+LEX_OUTPUT_ROOT = lex.yy
+LIBBISON_LIBDEPS = 
+LIBBISON_LTLIBDEPS = 
+LIBICONV = D:/Progra~1/GnuWin32/lib/libiconv.dll.a -LD:/Progra~1/GnuWin32/lib
+LIBINTL = D:/Progra~1/GnuWin32/lib/libintl.dll.a -LD:/Progra~1/GnuWin32/lib
+LIBOBJS = 
+LIBS =  -Wl,-s  -LD:/Progra~1/GnuWin32/lib  -lintl -lwsock32 -lole32 -luuid -lmsvcp60  
+LOCALCHARSET_TESTS_ENVIRONMENT = CHARSETALIASDIR="$(top_builddir)/lib"
+LTLIBICONV = -LD:/Progra~1/GnuWin32/lib -liconv -RD:/Progra~1/GnuWin32/lib
+LTLIBINTL = -LD:/Progra~1/GnuWin32/lib -lintl -RD:/Progra~1/GnuWin32/lib
+LTLIBOBJS = 
+M4 = /usr/bin/m4
+MAKEINFO = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run makeinfo
+MKDIR_P = /usr/bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGFMT_015 = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+NEXT_ERRNO_H = <errno.h>
+NEXT_INTTYPES_H = <inttypes.h>
+NEXT_STDINT_H = <stdint.h>
+NEXT_STDLIB_H = <stdlib.h>
+NEXT_STRING_H = <string.h>
+NEXT_UNISTD_H = <unistd.h>
+NEXT_WCHAR_H = <wchar.h>
+NEXT_WCTYPE_H = <wctype.h>
+O0CFLAGS = -Wall -Wpointer-arith -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math -Wstrict-prototypes
+O0CXXFLAGS = -Wall -Wpointer-arith -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math -fconserve-space -fno-rtti -D__STDC_LIMIT_MACROS
+OBJEXT = o
+PACKAGE = bison
+PACKAGE_BUGREPORT = bug-bison@gnu.org
+PACKAGE_COPYRIGHT_YEAR = 2008
+PACKAGE_NAME = GNU Bison
+PACKAGE_STRING = GNU Bison 2.4.1
+PACKAGE_TARNAME = bison
+PACKAGE_VERSION = 2.4.1
+PATH_SEPARATOR = :
+POSUB = po
+PRAGMA_SYSTEM_HEADER = #pragma GCC system_header
+PRIPTR_PREFIX = ""
+PRI_MACROS_BROKEN = 0
+PTRDIFF_T_SUFFIX = 
+RANLIB = ranlib
+REPLACE_CHOWN = 0
+REPLACE_CLOSE = 0
+REPLACE_FCHDIR = 0
+REPLACE_GETCWD = 0
+REPLACE_GETPAGESIZE = 0
+REPLACE_ISWCNTRL = 0
+REPLACE_LCHOWN = 0
+REPLACE_LSEEK = 0
+REPLACE_MEMMEM = 0
+REPLACE_MKSTEMP = 0
+REPLACE_PUTENV = 0
+REPLACE_STRCASESTR = 0
+REPLACE_STRDUP = 0
+REPLACE_STRERROR = 1
+REPLACE_STRSIGNAL = 0
+REPLACE_STRSTR = 0
+REPLACE_STRTOD = 0
+REPLACE_WCWIDTH = 1
+REPLACE_WRITE = 0
+SET_MAKE = 
+SHELL = /bin/sh
+SIG_ATOMIC_T_SUFFIX = 
+SIZE_T_SUFFIX = 
+STDBOOL_H = 
+STDINT_H = 
+STRIP = 
+UINT32_MAX_LT_UINTMAX_MAX = 1
+UINT64_MAX_EQ_ULONG_MAX = 0
+UNISTD_H_HAVE_WINSOCK2_H = 0
+USE_NLS = yes
+VALGRIND = 
+VERSION = 2.4.1
+VOID_UNSETENV = 0
+WARN_CFLAGS = 
+WARN_CXXFLAGS = 
+WCHAR_H = wchar.h
+WCHAR_T_SUFFIX = 
+WCTYPE_H = 
+WERROR_CFLAGS = 
+WINT_T_SUFFIX = 
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS =  --flag=error:3:c-format --flag=error_at_line:5:c-format
+XSLTPROC = 
+YACC = bison -y
+YACC_LIBRARY = liby.a
+YACC_SCRIPT = yacc
+YFLAGS = 
+abs_builddir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1
+abs_srcdir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1/../bison-2.4.1-src
+abs_top_builddir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1
+abs_top_srcdir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1/../bison-2.4.1-src
+ac_ct_CC = gcc
+ac_ct_CXX = 
+
+# Files installed for use by Automake.
+aclocaldir = ${datadir}/aclocal
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build = i386-pc-mingw32
+build_alias = i386-pc-mingw32
+build_cpu = i386
+build_os = mingw32
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+gl_LIBOBJS =  argmatch.o basename.o dirname.o dup-safer.o error.o exitfail.o fd-safer.o fopen-safer.o hash.o malloc.o obstack.o pipe-safer.o quote.o quotearg.o stpcpy.o strerror.o stripslash.o strndup.o strnlen.o strverscmp.o unsetenv.o wcwidth.o xmalloc.o
+gl_LTLIBOBJS =  argmatch.lo basename.lo dirname.lo dup-safer.lo error.lo exitfail.lo fd-safer.lo fopen-safer.lo hash.lo malloc.lo obstack.lo pipe-safer.lo quote.lo quotearg.lo stpcpy.lo strerror.lo stripslash.lo strndup.lo strnlen.lo strverscmp.lo unsetenv.lo wcwidth.lo xmalloc.lo
+gltests_LIBOBJS = 
+gltests_LTLIBOBJS = 
+host = i386-pc-mingw32
+host_alias = i386-pc-mingw32
+host_cpu = i386
+host_os = mingw32
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = $(SHELL) /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = /usr/bin/mkdir -p
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = c:/progra~1/bison
+program_transform_name = s&$$&&;s&^&&;s/i386-pc-mingw32//
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = ../bison-2.4.1-src
+sysconfdir = ${prefix}/etc
+target_alias = i386-pc-mingw32
+top_build_prefix = 
+top_builddir = .
+top_srcdir = ../bison-2.4.1-src
+ACLOCAL_AMFLAGS = -I m4
+SUBDIRS = build-aux po runtime-po lib data src doc examples tests etc
+aclocal_DATA = m4/bison-i18n.m4
+EXTRA_DIST = .prev-version .version cfg.mk maint.mk \
+  OChangeLog PACKAGING \
+  djgpp/Makefile.maint djgpp/README.in djgpp/config.bat \
+  djgpp/config.sed djgpp/config.site djgpp/config_h.sed \
+  djgpp/subpipe.c djgpp/subpipe.h djgpp/djunpack.bat \
+  djgpp/fnchange.lst djgpp/testsuite.sed
+
+
+# See comments in build-aux/git-version-gen.  However, we make .version depend
+# on configure so that .version and VERSION/PACKAGE_VERSION stay in sync in the
+# working copy (for example, when you run autoreconf && make).  Allowing these
+# to fall out of sync appears to have little potential to improve Bison build
+# efficiency (even if we were to replace VERSION/PACKAGE_VERSION with .version
+# everywhere possible).  On the other hand, it could be harmful.  For example,
+# a developer might naively reference .version in a test case while the bison
+# executable still compiles with VERSION, and so the test case might fail or
+# pass incorrectly.
+BUILT_SOURCES = $(top_srcdir)/.version
+all: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnits '; \
+	      cd $(srcdir) && $(AUTOMAKE) --gnits  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnits  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+javacomp.sh: $(top_builddir)/config.status $(top_srcdir)/build-aux/javacomp.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+javaexec.sh: $(top_builddir)/config.status $(top_srcdir)/build-aux/javaexec.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+install-aclocalDATA: $(aclocal_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(aclocaldir)" || $(MKDIR_P) "$(DESTDIR)$(aclocaldir)"
+	@list='$(aclocal_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(aclocalDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(aclocaldir)/$$f'"; \
+	  $(aclocalDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(aclocaldir)/$$f"; \
+	done
+
+uninstall-aclocalDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(aclocal_DATA)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(aclocaldir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(aclocaldir)/$$f"; \
+	done
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@case `sed 15q $(srcdir)/NEWS` in \
+	*"$(VERSION)"*) : ;; \
+	*) \
+	  echo "NEWS not updated; not releasing" 1>&2; \
+	  exit 1;; \
+	esac
+	$(am__remove_distdir)
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(aclocaldir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-aclocalDATA
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-aclocalDATA
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+	install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-generic \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+	dist-hook dist-lzma dist-shar dist-tarZ dist-zip distcheck \
+	distclean distclean-generic distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-aclocalDATA install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags tags-recursive uninstall \
+	uninstall-aclocalDATA uninstall-am
+
+
+.PHONY: maintainer-check
+maintainer-check:
+	cd tests && $(MAKE) $(AM_MAKEFLAGS) $@
+
+.PHONY: maintainer-push-check
+maintainer-push-check:
+	cd tests && $(MAKE) $(AM_MAKEFLAGS) $@
+
+.PHONY: maintainer-xml-check
+maintainer-xml-check:
+	cd tests && $(MAKE) $(AM_MAKEFLAGS) $@
+$(top_srcdir)/.version: configure
+	echo $(VERSION) > $@-t && mv $@-t $@
+dist-hook:
+	echo $(VERSION) > $(distdir)/.tarball-version
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Property changes on: bison\src\bison\2.4.1\bison-2.4.1\Makefile
___________________________________________________________________
Added: svn:eol-style
   + LF