thttpd: remove files not required for patch

examples/tools/thttpd-2.25b/config.h

Index: examples/tools/thttpd-2.25b/config.h
===================================================================
--- examples/tools/thttpd-2.25b/config.h	(revision 604)
+++ examples/tools/thttpd-2.25b/config.h	(working copy)
@@ -1,398 +0,0 @@
-/* config.h - configuration defines for thttpd and libhttpd
-**
-** Copyright © 1995,1998,1999,2000,2001 by Jef Poskanzer <jef@mail.acme.com>.
-** All rights reserved.
-**
-** Redistribution and use in source and binary forms, with or without
-** modification, are permitted provided that the following conditions
-** are met:
-** 1. Redistributions of source code must retain the above copyright
-**    notice, this list of conditions and the following disclaimer.
-** 2. Redistributions in binary form must reproduce the above copyright
-**    notice, this list of conditions and the following disclaimer in the
-**    documentation and/or other materials provided with the distribution.
-**
-** THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-** ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-** OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-** HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-** LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-** OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-** SUCH DAMAGE.
-*/
-
-#ifndef _CONFIG_H_
-#define _CONFIG_H_
-
-
-/* The following configuration settings are sorted in order of decreasing
-** likelihood that you'd want to change them - most likely first, least
-** likely last.
-**
-** In case you're not familiar with the convention, "#ifdef notdef"
-** is a Berkeleyism used to indicate temporarily disabled code.
-** The idea here is that you re-enable it by just moving it outside
-** of the ifdef.
-*/
-
-/* CONFIGURE: CGI programs must match this pattern to get executed.  It's
-** a simple shell-style wildcard pattern, with * meaning any string not
-** containing a slash, ** meaning any string at all, and ? meaning any
-** single character; or multiple such patterns separated by |.  The
-** patterns get checked against the filename part of the incoming URL.
-**
-** Restricting CGI programs to a single directory lets the site administrator
-** review them for security holes, and is strongly recommended.  If there
-** are individual users that you trust, you can enable their directories too.
-**
-** You can also specify a CGI pattern on the command line, with the -c flag.
-** Such a pattern overrides this compiled-in default.
-**
-** If no CGI pattern is specified, neither here nor on the command line,
-** then CGI programs cannot be run at all.  If you want to disable CGI
-** as a security measure that's how you do it, just don't define any
-** pattern here and don't run with the -c flag.
-*/
-#ifdef notdef
-/* Some sample patterns.  Allow programs only in one central directory: */
-#define CGI_PATTERN "/cgi-bin/*"
-/* Allow programs in a central directory, or anywhere in a trusted
-** user's tree: */
-#define CGI_PATTERN "/cgi-bin/*|/jef/**"
-/* Allow any program ending with a .cgi: */
-#define CGI_PATTERN "**.cgi"
-/* When virtual hosting, enable the central directory on every host: */
-#define CGI_PATTERN "/*/cgi-bin/*"
-#endif
-
-/* CONFIGURE: How many seconds to allow CGI programs to run before killing
-** them.  This is in case someone writes a CGI program that goes into an
-** infinite loop, or does a massive database lookup that would take hours,
-** or whatever.  If you don't want any limit, comment this out, but that's
-** probably a really bad idea.
-*/
-#define CGI_TIMELIMIT 30
-
-/* CONFIGURE: Maximum number of simultaneous CGI programs allowed.
-** If this many are already running, then attempts to run more will
-** return an HTTP 503 error.  If this is not defined then there's
-** no limit (and you'd better have a lot of memory).  This can also be
-** set in the runtime config file.
-*/
-#ifdef notdef
-#define CGI_LIMIT 50
-#endif
-
-/* CONFIGURE: How many seconds to allow for reading the initial request
-** on a new connection.
-*/
-#define IDLE_READ_TIMELIMIT 60
-
-/* CONFIGURE: How many seconds before an idle connection gets closed.
-*/
-#define IDLE_SEND_TIMELIMIT 300
-
-/* CONFIGURE: The syslog facility to use.  Using this you can set up your
-** syslog.conf so that all thttpd messages go into a separate file.  Note
-** that even if you use the -l command line flag to send logging to a
-** file, errors still get sent via syslog.
-*/
-#define LOG_FACILITY LOG_DAEMON
-
-/* CONFIGURE: Tilde mapping.  Many URLs use ~username to indicate a
-** user's home directory.  thttpd provides two options for mapping
-** this construct to an actual filename.
-**
-** 1) Map ~username to <prefix>/username.  This is the recommended choice.
-** Each user gets a subdirectory in the main chrootable web tree, and
-** the tilde construct points there.  The prefix could be something
-** like "users", or it could be empty.  See also the makeweb program
-** for letting users create their own web subdirectories.
-**
-** 2) Map ~username to <user's homedir>/<postfix>.  The postfix would be
-** the name of a subdirectory off of the user's actual home dir, something
-** like "public_html".  This is what Apache and other servers do.  The problem
-** is, you can't do this and chroot() at the same time, so it's inherently
-** a security hole.  This is strongly dis-recommended, but it's here because
-** some people really want it.  Use at your own risk.
-**
-** You can also leave both options undefined, and thttpd will not do
-** anything special about tildes.  Enabling both options is an error.
-*/
-#ifdef notdef
-#define TILDE_MAP_1 "users"
-#define TILDE_MAP_2 "public_html"
-#endif
-
-/* CONFIGURE: The file to use for authentication.  If this is defined then
-** thttpd checks for this file in the local directory before every fetch.
-** If the file exists then authentication is done, otherwise the fetch
-** proceeds as usual.
-**
-** If you undefine this then thttpd will not implement authentication
-** at all and will not check for auth files, which saves a bit of CPU time.
-*/
-#define AUTH_FILE ".htpasswd"
-
-/* CONFIGURE: The default character set name to use with text MIME types.
-** This gets substituted into the MIME types where they have a "%s".
-**
-** You can override this in the config file with the "charset" setting,
-** or on the command like with the -T flag.
-*/
-#define DEFAULT_CHARSET "iso-8859-1"
-
-
-/* Most people won't want to change anything below here. */
-
-/* CONFIGURE: This controls the SERVER_NAME environment variable that gets
-** passed to CGI programs.  By default thttpd does a gethostname(), which
-** gives the host's canonical name.  If you want to always use some other name
-** you can define it here.
-**
-** Alternately, if you want to run the same thttpd binary on multiple
-** machines, and want to build in alternate names for some or all of
-** them, you can define a list of canonical name to altername name
-** mappings.  thttpd seatches the list and when it finds a match on
-** the canonical name, that alternate name gets used.  If no match
-** is found, the canonical name gets used.
-**
-** If both SERVER_NAME and SERVER_NAME_LIST are defined here, thttpd searches
-** the list as above, and if no match is found then SERVER_NAME gets used.
-**
-** In any case, if thttpd is started with the -h flag, that name always
-** gets used.
-*/
-#ifdef notdef
-#define SERVER_NAME "your.hostname.here"
-#define SERVER_NAME_LIST \
-    "canonical.name.here/alternate.name.here", \
-    "canonical.name.two/alternate.name.two"
-#endif
-
-/* CONFIGURE: Undefine this if you want thttpd to hide its specific version
-** when returning into to browsers.  Instead it'll just say "thttpd" with
-** no version.
-*/
-#define SHOW_SERVER_VERSION
-
-/* CONFIGURE: Define this if you want to always chroot(), without having
-** to give the -r command line flag.  Some people like this as a security
-** measure, to prevent inadvertant exposure by accidentally running without -r.
-** You can still disable it at runtime with the -nor flag.
-*/
-#ifdef notdef
-#define ALWAYS_CHROOT
-#endif
-
-/* CONFIGURE: Define this if you want to always do virtual hosting, without
-** having to give the -v command line flag.  You can still disable it at
-** runtime with the -nov flag.
-*/
-#ifdef notdef
-#define ALWAYS_VHOST
-#endif
-
-/* CONFIGURE: If you're using the vhost feature and you have a LOT of
-** virtual hostnames (like, hundreds or thousands), you will want to
-** enable this feature.  It avoids a problem with most Unix filesystems,
-** where if there are a whole lot of items in a directory then name lookup
-** becomes very slow.  This feature makes thttpd use subdirectories
-** based on the first characters of each hostname.  You can set it to use
-** from one to three characters.  If the hostname starts with "www.", that
-** part is skipped over.  Dots are also skipped over, and if the name isn't
-** long enough then "_"s are used.  Here are some examples of how hostnames
-** would get turned into directory paths, for each different setting:
-** 1: www.acme.com ->    a/www.acme.com
-** 1: foobar.acme.com -> f/foobar.acme.com
-** 2: www.acme.com ->    a/c/www.acme.com
-** 2: foobar.acme.com -> f/o/foobar.acme.com
-** 3: www.acme.com ->    a/c/m/www.acme.com
-** 3: foobar.acme.com -> f/o/o/foobar.acme.com
-** 3: m.tv ->            m/t/v/m.tv
-** 4: m.tv ->            m/t/v/_/m.tv
-** Note that if you compile this setting in but then forget to set up
-** the corresponding subdirectories, the only error indication you'll
-** get is a "404 Not Found" when you try to visit a site.  So be careful.
-*/
-#ifdef notdef
-#define VHOST_DIRLEVELS 1
-#define VHOST_DIRLEVELS 2
-#define VHOST_DIRLEVELS 3
-#endif
-
-/* CONFIGURE: Define this if you want to always use a global passwd file,
-** without having to give the -P command line flag.  You can still disable
-** it at runtime with the -noP flag.
-*/
-#ifdef notdef
-#define ALWAYS_GLOBAL_PASSWD
-#endif
-
-/* CONFIGURE: When started as root, the default username to switch to after
-** initializing.  If this user (or the one specified by the -u flag) does
-** not exist, the program will refuse to run.
-*/
-#define DEFAULT_USER "nobody"
-
-/* CONFIGURE: When started as root, the program can automatically chdir()
-** to the home directory of the user specified by -u or DEFAULT_USER.
-** An explicit -d still overrides this.
-*/
-#ifdef notdef
-#define USE_USER_DIR
-#endif
-
-/* CONFIGURE: If this is defined, some of the built-in error pages will
-** have more explicit information about exactly what the problem is.
-** Some sysadmins don't like this, for security reasons.
-*/
-#define EXPLICIT_ERROR_PAGES
-
-/* CONFIGURE: Subdirectory for custom error pages.  The error filenames are
-** $WEBDIR/$ERR_DIR/err%d.html - if virtual hosting is enabled then
-** $WEBDIR/hostname/$ERR_DIR/err%d.html is searched first.  This allows
-** different custom error pages for each virtual hosting web server.  If
-** no custom page for a given error can be found, the built-in error page
-** is generated.  If ERR_DIR is not defined at all, only the built-in error
-** pages will be generated.
-*/
-#define ERR_DIR "errors"
-
-/* CONFIGURE: Define this if you want a standard HTML tail containing
-** $SERVER_SOFTWARE and $SERVER_ADDRESS to be appended to the custom error
-** pages.  (It is always appended to the built-in error pages.)
-*/
-#define ERR_APPEND_SERVER_INFO
-
-/* CONFIGURE: nice(2) value to use for CGI programs.  If this is undefined,
-** CGI programs run at normal priority.
-*/
-#define CGI_NICE 10
-
-/* CONFIGURE: $PATH to use for CGI programs.
-*/
-#define CGI_PATH "/usr/local/bin:/usr/ucb:/bin:/usr/bin"
-
-/* CONFIGURE: If defined, $LD_LIBRARY_PATH to use for CGI programs.
-*/
-#ifdef notdef
-#define CGI_LD_LIBRARY_PATH "/usr/local/lib:/usr/lib"
-#endif
-
-/* CONFIGURE: How often to run the occasional cleanup job.
-*/
-#define OCCASIONAL_TIME 120
-
-/* CONFIGURE: Seconds between stats syslogs.  If this is undefined then
-** no stats are accumulated and no stats syslogs are done.
-*/
-#define STATS_TIME 3600
-
-/* CONFIGURE: The mmap cache tries to keep the total number of mapped
-** files below this number, so you don't run out of kernel file descriptors.
-** If you have reconfigured your kernel to have more descriptors, you can
-** raise this and thttpd will keep more maps cached.  However it's not
-** a hard limit, thttpd will go over it if you really are accessing
-** a whole lot of files.
-*/
-#define DESIRED_MAX_MAPPED_FILES 1000
-
-/* CONFIGURE: The mmap cache also tries to keep the total mapped bytes
-** below this number, so you don't run out of address space.  Again
-** it's not a hard limit, thttpd will go over it if you really are
-** accessing a bunch of large files.
-*/
-#define DESIRED_MAX_MAPPED_BYTES 1000000000
-
-/* CONFIGURE: Minimum and maximum intervals between child-process reaping,
-** in seconds.
-*/
-#define MIN_REAP_TIME 30
-#define MAX_REAP_TIME 900
-
-
-/* You almost certainly don't want to change anything below here. */
-
-/* CONFIGURE: When throttling CGI programs, we don't know how many bytes
-** they send back to the client because it would be inefficient to
-** interpose a counter.  CGI programs are much more expensive than
-** regular files to serve, so we set an arbitrary and high byte count
-** that gets applied to all CGI programs for throttling purposes.
-*/
-#define CGI_BYTECOUNT 25000
-
-/* CONFIGURE: The default port to listen on.  80 is the standard HTTP port.
-*/
-#define DEFAULT_PORT 8006
-
-/* CONFIGURE: A list of index filenames to check.  The files are searched
-** for in this order.
-*/
-#define INDEX_NAMES "index.html", "index.htm", "index.xhtml", "index.xht", "Default.htm", "index.cgi"
-
-/* CONFIGURE: If this is defined then thttpd will automatically generate
-** index pages for directories that don't have an explicit index file.
-** If you want to disable this behavior site-wide, perhaps for security
-** reasons, just undefine this.  Note that you can disable indexing of
-** individual directories by merely doing a "chmod 711" on them - the
-** standard Unix file permission to allow file access but disable "ls".
-*/
-#define GENERATE_INDEXES
-
-/* CONFIGURE: Whether to log unknown request headers.  Most sites will not
-** want to log them, which will save them a bit of CPU time.
-*/
-#ifdef notdef
-#define LOG_UNKNOWN_HEADERS
-#endif
-
-/* CONFIGURE: Whether to fflush() the log file after each request.  If
-** this is turned off there's a slight savings in CPU cycles.
-*/
-#define FLUSH_LOG_EVERY_TIME
-
-/* CONFIGURE: Time between updates of the throttle table's rolling averages. */
-#define THROTTLE_TIME 2
-
-/* CONFIGURE: The listen() backlog queue length.  The 1024 doesn't actually
-** get used, the kernel uses its maximum allowed value.  This is a config
-** parameter only in case there's some OS where asking for too high a queue
-** length causes an error.  Note that on many systems the maximum length is
-** way too small - see http://www.acme.com/software/thttpd/notes.html
-*/
-#define LISTEN_BACKLOG 1024
-
-/* CONFIGURE: Maximum number of throttle patterns that any single URL can
-** be included in.  This has nothing to do with the number of throttle
-** patterns that you can define, which is unlimited.
-*/
-#define MAXTHROTTLENUMS 10
-
-/* CONFIGURE: Number of file descriptors to reserve for uses other than
-** connections.  Currently this is 10, representing one for the listen fd,
-** one for dup()ing at connection startup time, one for reading the file,
-** one for syslog, and possibly one for the regular log file, which is
-** five, plus a factor of two for who knows what.
-*/
-#define SPARE_FDS 10
-
-/* CONFIGURE: How many milliseconds to leave a connection open while doing a
-** lingering close.
-*/
-#define LINGER_TIME 500
-
-/* CONFIGURE: Maximum number of symbolic links to follow before
-** assuming there's a loop.
-*/
-#define MAX_LINKS 32
-
-/* CONFIGURE: You don't even want to know.
-*/
-#define MIN_WOULDBLOCK_DELAY 100L
-
-#endif /* _CONFIG_H_ */