Initial snapshot of the new BPF-enabled seccomp sandbox. This code is

sandbox/linux/seccomp_bpf/sandbox_bpf.cc

Index: sandbox/linux/seccomp_bpf/sandbox_bpf.cc
===================================================================
--- sandbox/linux/seccomp_bpf/sandbox_bpf.cc	(revision 0)
+++ sandbox/linux/seccomp_bpf/sandbox_bpf.cc	(revision 0)
@@ -0,0 +1,319 @@
+// Copyright (c) 2012 The Chromium Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+
+#include "sandbox/linux/seccomp_bpf/sandbox_bpf.h"
+
+// The kernel gives us a sandbox, we turn it into a playground :-)
+// This is version 2 of the playground; version 1 was built on top of
+// pre-BPF seccomp mode.
+namespace playground2 {
+
+Sandbox::ErrorCode Sandbox::probeEvaluator(int signo) {
+  switch (signo) {
+  case __NR_getpid:
+    // Return EPERM so that we can check that the filter actually ran.
+    return (ErrorCode)EPERM;
+  case __NR_exit_group:
+    // Allow exit() with a non-default return code.
+    return SB_ALLOWED;
+  default:
+    // Make everything else fail in an easily recognizable way.
+    return (ErrorCode)EINVAL;
+  }
+}
+
+bool Sandbox::kernelSupportSeccompBPF(int proc_fd) {
+  // Block all signals before forking a child process. This prevents an
+  // attacker from manipulating our test by sending us an unexpected signal.
+  sigset_t oldMask, newMask;
+  if (sigfillset(&newMask) ||
+      sigprocmask(SIG_BLOCK, &newMask, &oldMask)) {
+    die("sigprocmask() failed");
+  }
+
+  pid_t pid = fork();
+  if (pid < 0) {
+    // Die if we cannot fork(). We would probably fail a little later
+    // anyway, as the machine is likely very close to running out of
+    // memory.
+    // But what we don't want to do is return "false", as a crafty
+    // attacker might cause fork() to fail at will and could trick us
+    // into running without a sandbox.
+    sigprocmask(SIG_SETMASK, &oldMask, NULL);  // OK, if it fails
+    die("fork() failed unexpectedly");
+  }
+
+  // In the child process
+  if (!pid) {
+    // Test a very simple sandbox policy to verify that we can
+    // successfully turn on sandboxing.
+    suppressLogging_ = true;
+    evaluators_.clear();
+    setSandboxPolicy(probeEvaluator, NULL);
+    setProcFd(proc_fd);
+    startSandbox();
+    if (syscall(__NR_getpid) < 0 && errno == EPERM) {
+      syscall(__NR_exit_group, (intptr_t)100);
+    }
+    die(NULL);
+  }
+
+  // In the parent process
+  if (sigprocmask(SIG_SETMASK, &oldMask, NULL)) {
+    die("sigprocmask() failed");
+  }
+  int status;
+  if (HANDLE_EINTR(waitpid(pid, &status, 0)) != pid) {
+    die("waitpid() failed unexpectedly");
+  }
+  return WIFEXITED(status) && WEXITSTATUS(status) == 100;
+}
+
+Sandbox::SandboxStatus Sandbox::supportsSeccompSandbox(int proc_fd) {
+  // It the sandbox is currently active, we clearly must have support for
+  // sandboxing.
+  if (status_ == STATUS_ENABLED) {
+    return status_;
+  }
+
+  // Even if the sandbox was previously available, something might have
+  // changed in our run-time environment. Check one more time.
+  if (status_ == STATUS_AVAILABLE) {
+    if (!isSingleThreaded(proc_fd)) {
+      status_ = STATUS_UNAVAILABLE;
+    }
+    return status_;
+  }
+
+  if (status_ == STATUS_UNAVAILABLE && isSingleThreaded(proc_fd)) {
+    // All state transitions resulting in STATUS_UNAVAILABLE are immediately
+    // preceded by STATUS_AVAILABLE. Furthermore, these transitions all
+    // happen, if and only if they are triggered by the process being multi-
+    // threaded.
+    // In other words, if a single-threaded process is currently in the
+    // STATUS_UNAVAILABLE state, it is safe to assume that sandboxing is
+    // actually available.
+    status_ == STATUS_AVAILABLE;
+    return status_;
+  }
+
+  // If we have not previously checked for availability of the sandbox or if
+  // we otherwise don't believe to have a good cached value, we have to
+  // perform a thorough check now.
+  if (status_ == STATUS_UNKNOWN) {
+    status_ = kernelSupportSeccompBPF(proc_fd)
+      ? STATUS_AVAILABLE : STATUS_UNSUPPORTED;
+
+    // As we are performing our tests from a child process, the run-time
+    // environment that is visible to the sandbox is always guaranteed to be
+    // single-threaded. Let's check here whether the caller is single-
+    // threaded. Otherwise, we mark the sandbox as temporarily unavailable.
+    if (status_ == STATUS_AVAILABLE && !isSingleThreaded(proc_fd)) {
+      status_ = STATUS_UNAVAILABLE;
+    }
+  }
+  return status_;
+}
+
+void Sandbox::setProcFd(int proc_fd) {
+  proc_fd_ = proc_fd;
+}
+
+void Sandbox::startSandbox() {
+  if (status_ == STATUS_UNSUPPORTED || status_ == STATUS_UNAVAILABLE) {
+    die("Trying to start sandbox, even though it is known to be unavailable");
+  } else if (status_ == STATUS_ENABLED) {
+    die("Cannot start sandbox recursively. Use multiple calls to "
+        "setSandboxPolicy() to stack policies instead");
+  }
+  if (proc_fd_ < 0) {
+    proc_fd_ = open("/proc", O_RDONLY|O_DIRECTORY);
+  }
+  if (proc_fd_ < 0) {
+    // For now, continue in degraded mode, if we can't access /proc.
+    // In the future, we might want to tighten this requirement.
+  }
+  if (!isSingleThreaded(proc_fd_)) {
+    die("Cannot start sandbox, if process is already multi-threaded");
+  }
+
+  // We no longer need access to any files in /proc. We want to do this
+  // before installing the filters, just in case that our policy denies
+  // close().
+  if (proc_fd_ >= 0) {
+    if (HANDLE_EINTR(close(proc_fd_))) {
+      die("Failed to close file descriptor for /proc");
+    }
+    proc_fd_ = -1;
+  }
+
+  // Install the filters.
+  installFilter();
+
+  // We are now inside the sandbox.
+  status_ = STATUS_ENABLED;
+}
+
+bool Sandbox::isSingleThreaded(int proc_fd) {
+  if (proc_fd < 0) {
+    // Cannot determine whether program is single-threaded. Hope for
+    // the best...
+    return true;
+  }
+
+  struct stat sb;
+  int task = -1;
+  if ((task = openat(proc_fd, "self/task", O_RDONLY|O_DIRECTORY)) < 0 ||
+      fstat(task, &sb) != 0 ||
+      sb.st_nlink != 3 ||
+      HANDLE_EINTR(close(task))) {
+    if (task >= 0) {
+      HANDLE_EINTR(close(task));
+    }
+    return false;
+  }
+  return true;
+}
+
+void Sandbox::setSandboxPolicy(EvaluateSyscall syscallEvaluator,
+                               EvaluateArguments argumentEvaluator) {
+  evaluators_.push_back(std::make_pair(syscallEvaluator, argumentEvaluator));
+}
+
+void Sandbox::installFilter() {
+  // Verify that the user pushed a policy.
+  if (evaluators_.empty()) {
+  filter_failed:
+    die("Failed to configure system call filters");
+  }
+
+  // Set new SIGSYS handler
+  struct sigaction sa;
+  memset(&sa, 0, sizeof(sa));
+  sa.sa_sigaction = &sigSys;
+  sa.sa_flags = SA_SIGINFO;
+  if (sigaction(SIGSYS, &sa, NULL) < 0) {
+    goto filter_failed;
+  }
+
+  // Unmask SIGSYS
+  sigset_t mask;
+  if (sigemptyset(&mask) ||
+      sigaddset(&mask, SIGSYS) ||
+      sigprocmask(SIG_UNBLOCK, &mask, NULL)) {
+    goto filter_failed;
+  }
+
+  // We can't handle stacked evaluators, yet. We'll get there eventually
+  // though. Hang tight.
+  if (evaluators_.size() != 1) {
+    die("Not implemented");
+  }
+
+  // If the architecture doesn't match SECCOMP_ARCH, disallow the
+  // system call.
+  std::vector<struct sock_filter> program;
+  program.push_back((struct sock_filter)
+                    BPF_STMT(BPF_LD+BPF_W+BPF_ABS,
+                             offsetof(struct arch_seccomp_data, arch)));
+  program.push_back((struct sock_filter)
+    BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, SECCOMP_ARCH, 1, 0));
+  program.push_back((struct sock_filter)
+    BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ERRNO + SECCOMP_DENY_ERRNO));
+
+  // Grab the system call number, so that we can implement jump tables.
+  program.push_back((struct sock_filter)
+    BPF_STMT(BPF_LD+BPF_W+BPF_ABS, offsetof(struct arch_seccomp_data, nr)));
+
+  // Evaluate all possible system calls and depending on their
+  // exit codes generate a BPF filter.
+  // This is very inefficient right now. We need to be much smarter
+  // eventually.
+  // We currently incur a O(N) overhead on each system call, with N
+  // being the number of system calls. It is easy to get this down to
+  // O(log_2(M)) with M being the number of system calls that need special
+  // treatment.
+  EvaluateSyscall evaluateSyscall = evaluators_.begin()->first;
+  for (int sysnum = MIN_SYSCALL; sysnum <= MAX_SYSCALL; ++sysnum) {
+    ErrorCode err = evaluateSyscall(sysnum);
+    int ret;
+    switch (err) {
+    case SB_INSPECT_ARG_1...SB_INSPECT_ARG_6:
+      die("Not implemented");
+    case SB_TRAP:
+      ret = SECCOMP_RET_TRAP;
+      break;
+    case SB_ALLOWED:
+      ret = SECCOMP_RET_ALLOW;
+      break;
+    default:
+      if (err >= static_cast<ErrorCode>(1) &&
+          err <= static_cast<ErrorCode>(4096)) {
+        // We limit errno values to a reasonable range. In fact, the Linux ABI
+        // doesn't support errno values outside of this range.
+        ret = SECCOMP_RET_ERRNO + err;
+      } else {
+        die("Invalid ErrorCode reported by sandbox system call evaluator");
+      }
+      break;
+    }
+    program.push_back((struct sock_filter)
+      BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, sysnum, 0, 1));
+    program.push_back((struct sock_filter)
+      BPF_STMT(BPF_RET+BPF_K, ret));
+  }
+
+  // Everything that isn't allowed is forbidden. Eventually, we would
+  // like to have a way to log forbidden calls, when in debug mode.
+  program.push_back((struct sock_filter)
+    BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ERRNO + SECCOMP_DENY_ERRNO));
+
+  // Install BPF filter program
+  const struct sock_fprog prog = { program.size(), &program[0] };
+  if (prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0) ||
+      prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog)) {
+    goto filter_failed;
+  }
+
+  return;
+}
+
+void Sandbox::sigSys(int nr, siginfo_t *info, void *void_context) {
+  if (nr != SIGSYS || info->si_code != SYS_SECCOMP || !void_context) {
+    // die() can call LOG(FATAL). This is not normally async-signal safe
+    // and can lead to bugs. We should eventually implement a different
+    // logging and reporting mechanism that is safe to be called from
+    // the sigSys() handler.
+    die("Unexpected SIGSYS received");
+  }
+  ucontext_t *ctx = reinterpret_cast<ucontext_t *>(void_context);
+  int old_errno   = errno;
+
+  // In case of error, set the REG_RESULT CPU register to the default
+  // errno value (i.e. EPERM).
+  // We need to be very careful when doing this, as some of our target
+  // platforms have pointer types and CPU registers that are wider than
+  // ints. Furthermore, the kernel ABI requires us to return a negative
+  // value, but errno values are usually positive. And in fact, it would
+  // be perfectly reasonable for somebody to have defined them as unsigned
+  // properties. This makes the correct incantation of type casts rather
+  // subtle. Sometimes, C++ is just too smart for its own good.
+  void *rc        = (void *)(intptr_t)-(int)SECCOMP_DENY_ERRNO;
+
+  // This is where we can add extra code to handle complex system calls.
+  // ...
+
+  ctx->uc_mcontext.gregs[REG_RESULT] = reinterpret_cast<greg_t>(rc);
+  errno                              = old_errno;
+  return;
+}
+
+
+bool Sandbox::suppressLogging_          = false;
+Sandbox::SandboxStatus Sandbox::status_ = STATUS_UNKNOWN;
+int    Sandbox::proc_fd_                = -1;
+std::vector<std::pair<Sandbox::EvaluateSyscall,
+                      Sandbox::EvaluateArguments> > Sandbox::evaluators_;
+
+}  // namespace
Property changes on: sandbox/linux/seccomp_bpf/sandbox_bpf.cc
___________________________________________________________________
Added: svn:eol-style
   + LF